Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Slight haze/ slight straw
BulletPoint2 : Cure Type: Room temperature or Heat cure
BulletPoint3 : Benefits: Resistant to many organic/inorganics Strong bond strength Great electrical insulator Durable
BulletPoint4 : Mix Ratio by weight: 100:100 / Resin:Hardener
BulletPoint5 : Substrates: metals, plastics, concrete, sheetrock, Glass, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plastics
CompatibleMaterial1 : Rubber
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Glass
CompatibleMaterial4 : Concrete
CompatibleMaterial5 : Stone
CompatibleMaterial6 : Leather
CompatibleMaterial7 : Marble
ItemForm : Straw
ItemName : Glass-Bond 1 Super Strong Bonding Agent 2 Hour Quick Drying
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Wood
NumberOfItems : 1
PartNumber : Glass-Bond 1-
ProductDescription : Mix Ratio by weight: 100:100 / Resin:Hardener Substrates: metals, plastics, concrete, sheetrock, Glass, marble, stone, rock, plaster,cement,glass fabrics, wood, leather and rigid plastics Operating Temperature: -60 to 110 C Typical Application(s): Anything requiring the unique properties this adhesive offers Pot Life: 5 minutes Viscosity @ 25 C, mPas (cP): Thixotropic Solids Content: 100% Specific Gravity, mixed: 1.2 g/cc 30 minutes: @ 65C 2 hours: @ 25C Volume Resistivity: 5.00e+11 ohm-cm Dielectric Constant: 4.8 Dielectric Strength: 410kV/in CTE, linear: 33.3 in/in-F@ RT Hardness, Shore D: 70 Glass Transition Temp, Tg: 25.0 C, 77.0 F Glass-Bond 1 Hour Cure Strongest Industrial Grade Epoxy Adhesive Quickly Hardens is an exceptional epoxy formulation recommended for lower temperature or wet industrial bonding applications where FAST CURING is required.Glass-Bond 1 is versaGlass two-part epoxy system contains no solvents, mixes easily at room temperature, and is suitable for high performance structural bonding applications where the combination of very fast room temperature curing coupled with low shrinkage and excellent mechanical and electrical properties is needed.Glass-Bond 1 develops strong, tough bonds to metals, plastics, concrete, sheetrock, marbel, stone, rock, Glass, plaster, cement, glass and glass fabrics, hardboards and forestry products, Glasss, rubber, masonry materials, and other construction materials.Glass-Bond 1 is an excellent electrical insulator, and provides superior resistance to vapors and gases, water, galvanic action, petroleum fuels, salt solutions, and many other organic and inorganic compounds.Glass-Bond 1 develops significant properties 1 hour after mixing. However, an extended cure of 4-6 hours at 25C is required for fully matured bonds.For safe handling information on this product, consult the Material Safety
ProductSiteLaunchDate : 2016-03-28T14:23:01.795Z
UnspscCode : 31201600