Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Silver
BulletPoint2 : Cure Type: Heat cure or Room temperature
BulletPoint3 : Benefits: High strength Perfect bond Cold solder for heat-sensitive components
BulletPoint4 : Mix Ratio by weight: 100:8 / Resin:Hardener
BulletPoint5 : Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
Color : Bronze,Silver
CompatibleMaterial : Glass
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Glass
CompatibleMaterial3 : Ceramic
CompatibleMaterial4 : Ceramic
ItemForm : Paste
ItemName : Silver-Bond 2NS Pure Silver Filled Electrically Conductive Non- SAG Epoxy, Maximum Continuity of Conductivity
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Aluminum
NumberOfItems : 1
PartNumber : Silver-Bond 2NS-50
ProductDescription : Mix Ratio by weight: 100:8 / Resin:Hardener Substrates: Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Operating Temperature: 60 to +160C Typical Applications: Electrical, conductive, rmi/efi shielding, circuitry, printed circuit board and electronics repair Specific Gravity, mixed: 2.79 Reactive solids contents, %: 100 Pot Life: 1 Hour Shelf Life: 1 Year 15 minutes: @ 100C 45 minutes: @ 50C 24 hours: Room temperature Hardness, Shore D: 86 Shrinkage linear in/in: 0.0003 Lap shear strength, psi: 9800 Volume Resistivity ohm. cm: 0.0001 Thermal Expansion Coefficient, (cm / cm / C 10-5): 1.5 Thermal Conductivity, btu / hr / ft2 / F / in: 100 Tensile Strength, psi: 9500 Compressive Strength, psi: 14,000 Heat Distortion, C: 95 Electrical Resistivity: < 1x10 -4 ohmcm Silver-Bond 2NS Pure Silver Filled Electrically Conductive Non- SAG Epoxy, Maximum Continuity of Conductivity is an epoxy adhesive and coating formulation based on pure silver. This versatile silver formulation offers the maximum continuity of conductivity with an electrical resistivity value of less than 1x10-4 ohmcm.Silver-Bond 2NS Pure Silver Filled Electrically Conductive Non- SAG Epoxy, Maximum Continuity of Conductivity is also characterized by a wide operating temperature range from 50 to +160C.Silver-Bond 2NS Pure Silver Filled Electrically Conductive Non- SAG Epoxy, Maximum Continuity of Conductivity is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Silver-Bond 2NS Pure Silver Filled Electrically Conductive Non- SAG Epoxy, Maximum Continuity of Conductivity completely mixed adhesive to the prepared surfaces, and gently press these surfaces together.
ProductSiteLaunchDate : 2016-03-28T14:21:50.430Z
UnspscCode : 23271800
WaterResistanceLevel : waterproof