Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Milky translucent
BulletPoint2 : Cure Type: Room temperature or Heat cure
BulletPoint3 : Benefits: Great for Aerospace applications Great for reinforcing applications Bonds to many substrates
BulletPoint4 : Mix Ratio by weight: 100:22 / Resin:Hardener
BulletPoint5 : Substrates: metals, glass, ceramics, wood and many plastics
Color : Amber
CompatibleMaterial : Wood,glass,packaging,plastics
CompatibleMaterial1 : Wood
CompatibleMaterial2 : Glass
CompatibleMaterial3 : Plastic
CompatibleMaterial4 : Alloy Steel
ItemForm : Paste
ItemName : Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
ItemVolume : 24 fluid_ounces
Manufacturer : Epoxy International
Material : Wood
NumberOfItems : 1
PartNumber : Strong-Bond 104-100
ProductDescription : Mix Ratio by weight: 100:22 / Resin:Hardener Substrates: metals, glass, ceramics, wood and many plastics Operating Temperature: -60 to 125 C Typical Application(s): PCB components, aerospace, anything where superior properties are required Solids Content: 100% Specific Gravity, mixed: 1.19 g/cc Pot Life: 30 minutes 4 hours: @ 65C 24 hours: @ 25C Hardness, Shore D: 88 Dielectric Constant: 4.6 @ Frequency 1000 Hz Dielectric Strength: 16.1 kV/mm Volume of resistivity: 6.00e+13 ohm-cm1.00e+10 ohm-cm @ Temperature 100 C Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic is a thixotropic epoxy system recommended for critical electronics, aerospace and industrial bonding, laminating and reinforcing applications requiring an adhesive with high-fill, non-sag characteristics.Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic solvent-free adhesive is easily mixed and used for staking components to printed circuit boards for enhanced mechanical rigidity, and for bonding, laminating and repair applications involving metals, glass, ceramics, wood and many plastics.Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic hardens to a tough, enamel-like coating offering good chemical resistance as well as superior physical and mechanical properties.Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic provides good electrical insulation and resistance to weather, galvanic action, petroleum products and lubricants, alcohol, salts, mild acids and alkalis, and other organic and inorganic compounds.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Strong-Bond 104 Electronic Industries Epoxy Adhesive, Special Formulation, 2 Part, Thixotropic mixed adhesive to t
ProductSiteLaunchDate : 2016-03-28T14:22:27.698Z
UnitCount : 1
UnspscCode : 31201600
WaterResistanceLevel : not_water_resistant