Cart 2 india

Specification
Brand : Epoxy International
BulletPoint1 : Appearance: Clear transparent
BulletPoint2 : Cure Type: Room temperature or Heat Cure
BulletPoint3 : Benefits: Good wetting Solvent free Excellent flowability Adheres strongly to numerous substrates
BulletPoint4 : Mix Ratio by weight: 100:11 / Resin:Hardener
BulletPoint5 : Substrates: Ceramics, glass to glass, fabrics, metals, laminates and other composite materials
Color : Clear
CompatibleMaterial1 : Glass
CompatibleMaterial2 : Plastic
ItemForm : Paste
ItemName : Strong-Bond 113 Clear Low Viscosity, 2 Part, Epoxy Adhesive, Solvent Free, Room Temperature Cure
ItemPackageQuantity : 1
ItemTypeKeyword : conductive-adhesives
Manufacturer : Epoxy International
Material : Resin
NumberOfItems : 1
PartNumber : Strong-Bond 113-100
ProductDescription : Mix Ratio by weight: 100:11 / Resin:Hardener Substrates: Ceramics, glass to glass, fabrics, metals, laminates and other composite materials Operating Temperature: -60 to 130 C Typical Application: assembly and repair work of fiber optic and other high performance electronic and aerospace systems and components structural laminating applications where an initial low viscosity and near transparent "color" are needed. Specific Gravity: 1.15 Reactive solids contents, %: 100 Pot Life: 30 minutes Viscosity: 300 cps 4 hours: @ 65C 24 hours: @ 25C Volume Resistivity: 6.00e+13 ohm-cm Dielectric Constant: 4.2 Dielectric Strength: 410 volts/mil Hardness, Shore D: 88 Dissipation factor: 0.020 Strong-Bond 113 Clear Low Viscosity, 2 Part, Epoxy Adhesive, Solvent Free, Room Temperature Cure is a clear, low viscosity epoxy adhesive system that contains no solvents, cures at room temperature, has excellent flow ability and wetting characteristics, and adheres strongly to glass, ceramics, most metals and many plastics.Strong-Bond 113 Clear Low Viscosity, 2 Part, Epoxy Adhesive, Solvent Free, Room Temperature Cure is particularly recommended for assembly and repair work of fiber optic and other high performance electronic and aerospace systems and components, and for structural laminating applications where an initial low viscosity and near transparent "color" are needed.Strong-Bond 113 Clear Low Viscosity, 2 Part, Epoxy Adhesive, Solvent Free, Room Temperature Cure is a good electrical insulator, provides excellent resistance to weather, galvanic action, salt solutions and many other chemicals including mild acid and alkalis, petroleum solvents, lubricating oils, jet fuels and gasoline, and alcohol.For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS).1) Carefully clean and dry all surfaces to be bonded.2) Apply Strong-Bond 113 Clear Low Viscosity, 2 Part, Epoxy Adhesive, Solvent Free, Room Temperat
ProductSiteLaunchDate : 2016-03-28T14:22:43.856Z
UnspscCode : 31201600
WaterResistanceLevel : waterproof