Cart 2 india

Specification
Brand : LD-Teemm
BulletPoint1 : 1. Product Specifications: Purity 99.99% Platinum sheet, Width*Length=30mm*30mm, Thickness 0.2mm, Electrode PTFE rod diameter 6mm, length 140mm. Please note the Platinum sheet is welded to gold-plate copper rod, so it cannot be replaced.
BulletPoint2 : 2. Item included: 1 unit x Polytetrafluoroethylene rod Platinum Sheet electrode. Note: Do not bend the platinum sheet during use, repeated tugging and pulling of the platinum sheet will cause it to fall off from the platinum wire.
BulletPoint3 : 3. Platinum electrodes are sealed and welded in a PTFE rod with a gold-plated copper rod terminal (used with an alligator-nose clevis wire clamp), the exposed area of the platinum sheet can usually be customized to various specifications, you can choose according to your actual needs for the right size.
BulletPoint4 : 4. Product Customized: For Special requirements for the Platinum Sheet electrode, just contact us before you ordering, and tell us your specific parameters (size /thickness /etc.)
BulletPoint5 : 5. Application: Platinum electrode is the indicator electrode for measuring redox potential, and after matching with tungsten or mercuric electrode, it can be used for potential titration of redox reflection, and usually it can be used as the working electrode in the three-electrode system, which is suitable for all kinds of electrochemical workstations.
ConnectorType : Screw
ItemName : LD-Teemm Platinum Electrode 30 * 30 * 0.2mm Platinum Sheet, Purity 99.99% Platinum Plate with Length 140mm PTFE Rod Electrode, Gold-Plated Copper Terminal Block, Special for electrolytic Analysis
ItemTypeKeyword : lab-electrodes
Manufacturer : LD-Teemm
Material1 : Polytetrafluoroethylene
Material2 : Platinum
NumberOfItems : 1
PartNumber : LD-DJ140-PT-T0.2A30
ProductDescription : Notice:
1. Do not bend the platinum sheet during use, repeated tugging and pulling of the platinum sheet will cause it to fall off from the platinum wire.
2. The electrode platinum sheet can be cleaned in chromic acid solution before use, and then washed with distilled water.
3. If there is oil sticking on the surface of platinum sheet, it should be cleaned by acetone, and then cleaned in chromic acid solution and distilled water.

Product Structure:
Platinum electrodes are sealed and welded in a PTFE rod with a gold-plated copper rod terminal (used with an alligator-nose clevis wire clamp), the exposed area of the platinum sheet can usually be customized to various specifications, For Special requirements for the Platinum Sheet electrode, just contact us before you ordering, and tell us your specific parameters (size /thickness /etc.)
ProductSiteLaunchDate : 2024-03-19T01:13:54.438Z
Size : T:0.2mm, L*W=30*30mm
Style : platinum sheet, PTFE rod L: 140mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39121400