Cart 2 india

Specification
Brand : JESSINIE
BulletPoint : Made in United States
BulletPoint1 : The module adopts the HIC communication optocoupler isolation scheme to drive the relay, which has stable performance and is very suitable for use in situations where there are fewer I0 ports and a large number of relays need to be driven.
BulletPoint2 : The relay can load a MAX current of 10A (resistive load) and has three address control bits A2, A1, and A0. It can expand up to 8 sets of 1IC addresses. When you use 4 11C relay modules, you can connect 8 sets of modules on two buses through MOSTs. With only two 10 analog 1IC communication, you can control up to 4 x8=32 relays
BulletPoint3 : If you choose a 16 channel I1C relay module, your MOST can control up to 128 relays through two 10 port analog 1IC, greatly saving you 10 ports in situations where multiple relays are used.
BulletPoint4 : Control voltage: 0-220V, module type: 16 relay control
BulletPoint5 : Working current: 100ma/piece, load current: 10A (resistive load)/7A (inductive load)
ConnectorType : Through Hole
CurrentRating : 25 amps
CurrentRating1 : 10 amps
CurrentRating2 : 7 amps
ExternallyAssignedProductIdentifier1 : 696505444236
ExternallyAssignedProductIdentifier2 : 0696505444236
IncludedComponents : RGF2BU615L
InputVoltage : 120 volts
ItemName : JESSINIE 16 Channel 5V Relay Module with Optocoupler Isolation 10A IIC Expandable Isolation Driver Relay Board XL9535-K16V5
ItemPackageDimensions_Height : 22.86 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 16.51 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electromechanical-relays
Manufacturer : JESSINIE
Material : Copper
MaximumSwitchingCurrent : 20 amps
MaximumSwitchingVoltage : 120 volts
MeasurementSystem : Imperial
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MinimumSwitchingVoltage : 24 volts_of_direct_current
ModelNumber : RH4B-U
MountingType : PCB Mount
NumberOfItems : 1
NumberOfTerminals : 1
OperatingVoltage : 120 volts
OperationMode : Automatic
PartNumber : D440176-RH4B-U
ProductDescription : Pin names and functions
VIN: Positive pole of signal power supply, 3.3-5V
5V: Relay power supply positive pole, 5V
GND: Input output negative pole, shared
SCL: IIC clock line, high level consistent with VIN voltage
SDA: IIC data cable, high level consistent with VIN voltage
NC: Normally closed end of relay
COM: Relay common terminal
NO: Relay always starts
J1 Jumper: Insert the jumper cap and short circuit the signal power and relay power, disconnect the jumper cap and disconnect the signal power and relay power

ProductSiteLaunchDate : 2023-12-05T09:58:03.769Z
SpecificationMet : IEC/EN 60947
SpecificationMet1 : CE
SpecificationMet2 : cULus
SpecificationMet3 : UKCA
SpecificationMet4 : TUV
SpecificationMet5 : RoHS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39122300
UpperTemperatureRating : 70 degrees_celsius
Wattage : 400 milliwatts