Cart 2 india

Specification
Brand : AUCELI
BulletPoint1 : Sturdy Material: This LED light turn signal flasher is made of plastic and copper. Plastic material has good stability and can resist the influence of external substances, thus extending the service life of the LED light turn signal flasher. Copper material has high strength and toughness, which can withstand certain mechanical stress and impact, thus increasing the durability of the LED light turn signal flasher.
BulletPoint2 : Practical Function: This LED light turn signal flasher can solve the problem of turn signal and hazard warning flashing, not flashing or bulb burning warning on the dashboard, it can replace the faulty relay such as not flashing or over-flashing to make the flasher emit a signal light that lights up and then dims down to ensure the frequency is stable and accurately indicate the direction of the vehicle's driving.
BulletPoint3 : Widely Compatible: This LED light turn signal flasher measures 1.18 x 1.18 inches, the upper FM knob measures 0.39 inches, the lower plug measures 0.51 inches, the voltage is 12V, the current is 10A, and the power is 0.1-150W. It is suitable for kinds of motorcycle and automobile turn signal settings. Before purchasing, please make sure this relay module is suitable for your vehicle.
BulletPoint4 : Easy to Install: This LED light turn signal flasher features a plug-and-play and adjustable design for easy and convenient operation. All you need to do is plug it directly into the fuse box and make sure the pins are in the correct position for the correct flashing function. This LED turn signal flasher features a 3-pin configuration with easy-to-install pin markings and is designed to meet the voltage and current requirements of LED lights.
BulletPoint5 : Adjustable Flashing Frequency: This LED light turn signal flasher has an adjustable flash rate. You can adjust the flash speed of the relay by turning the knob on the top of the relay. Clockwise adjustment makes the flash faster and counterclockwise adjustment makes the flash slower. You can easily adjust the speed to achieve your desired effect and ensure consistent bulb performance.
BulletPoint6 : Parameters: Product Name: Strobe Controller for LED Lights; Product Model: GS-100C; Operating Voltage: DC 12V-24V; Maximum Operating Current: 3A; Size: 1.96''x1.1''x0.59''
BulletPoint7 : Installation: Connect the two-wire side to the power source, and the four-wire side to two or more LED lights. Red Wires are Positive: connect it to the positive terminal of the power supply or the LED lights. Black Wires are Negative: connect it to the negative terminal of the power supply or the LED lights
CircuitType : parallel
Color : Black
ConnectorType : Plug-In
ControlMethod : touch
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier1 : 663899268458
ExternallyAssignedProductIdentifier2 : 0663899268458
IncludedComponents : 2Pcs Flash Strobe Controller (12V GS-100C)
InputVoltage : 12 volts
InternationalProtectionRating : IP54
ItemName : AUCELI Car Flasher Relay, CF-13 3 Pin LED 12V Adjustable Vehicle Electronic Blinker Relay, Flasher Relay for LED Turn Signal Fixing Hyper Blink Flash, Universal Automotive Accessories
ItemPackageDimensions_Height : 0.12 inches
ItemPackageDimensions_Length : 1.1 inches
ItemPackageDimensions_Width : 0.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-electronic-flashers
LowerTemperatureRating : -40 degrees_celsius
Manufacturer : AUCELI
Material : Acrylonitrile Butadiene Styrene
Material1 : Copper
Material2 : Plastic
MaximumSwitchingCurrent : 20 amps
MaximumSwitchingVoltage : 12 volts
MeasurementSystem : Number
MinimumSwitchingVoltage : 12 volts_of_direct_current
ModelName : Car Flasher Relay
ModelNumber : Car Flasher Relay
MountingType : Plug In Mount
NumberOfItems : 1
NumberOfPositions : 2
NumberOfTerminals : 3
OperatingTime : 1.5 seconds
OperatingVoltage : 12 volts_of_direct_current
OperationMode : Manual
PartNumber : AUCELI-OBD2
ProductDescription :
Specifications:
Material: plastic, copper
Color: black
Size: 1.18 x 1.18 inches
Weight: 36g/1.27oz
Quantity: 1
Voltage: 12V
Current: 10A
Power: 0.36W

Features：
-Adjustable flash frequency, CF13KT turn signals have adjustable flash frequency function, which can be personalized according to the driver's needs.
-Safety and reliability, as a turn signal light for automobile or motorcycle, CF13KT turn signal light focuses on safety and reliability in its design, thus providing drivers with clear turn signals.
-Strong versatility, the turn signal is suitable for a variety of models, including automobiles and motorcycles, which has good versatility.
-Unique design, this turn signal has round button and tip design, which is not only beautiful and generous, but also easy to operate.
ProductSiteLaunchDate : 2025-01-01T08:32:28.482Z
Size : 1.96''x1.1''x0.59''
SpecificationMet : CE
SpecificationMet1 : ETL
SpecificationMet2 : cULus
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Push Button
TerminalType : Spade
UnspscCode : 25172900
UpperTemperatureRating : 80 degrees_celsius
Voltage : 12 volts
Wattage : 0.36 watts