Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : Excellent Design: Adopting premium 4 layer PCB, integrating 2560 and the control board onto one PCB, making wiring simpler and more stable.
BulletPoint2 : With Step Motor: The motherboard adopts a dedicated power chip that supports 12V‑24V and multiple stepper drives of 4988, 8825, TMC2208, TMC2100, suitable for LCD2004, LCD12864, for MKS TFT24, 28, 32, 35, 70.
BulletPoint3 : Ultra High Speed Computing Capability: Due to the high speed IO flipping speed and powerful timer of the main control module, the for MKS DLC32 is suitable for beginners to upgrade the main board of the for Makerbase wood CNC carving machine. The speed of the tool accessories can get to 8000 millimeters per minute, which can achieve a very high carving speed.
BulletPoint4 : Easy Control: The for Makerbase CNC engraving machine motherboard also has a mobile APP function, which can connect to for MKS DLC32, control motion, edit images, upload files, and more.
BulletPoint5 : Wide Compatibility: The DLC32 offline controller supports for GRBLLASER and for Lightburn software, which is very easy to use for all engraving machine users.
ChipsetType : Intel Z97
CompatibleDevices : LCD2004, LCD12864, MKS TFT24, MKS TFT28, MKS TFT32, MKS TFT35, MKS TFT70, GRBLLASER, LightBurn
GraphicsCardInterface : pci_e
ItemName : Cutter Control Board 32 Bit Main Board PCBLaser Engraver Mai board with A4988 Step Motor for Engraver 12‑24VDC
ItemPackageDimensions_Height : 21.8 centimeters
ItemPackageDimensions_Length : 6.6 centimeters
ItemPackageDimensions_Width : 13.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : engraving-tools
MainPowerConnectorType : 24-Pin
Manufacturer : WALFRONT
MemoryClockSpeed : 240 MHz
ModelName : Walfront0dut5p8n6x
ModelNumber : MKS DLC32
NumberOfItems : 1
NumberOfPorts : 3
PartNumber : WALFRONT0dut5p8n6x
ProductDescription : Spec:
Item Type: Engraver Mainboard
Material: PCB
Model: FOR MKS DLC32, motherboard. A4988, driver.
Voltage: 12-24VDC
MCU: ESP32-WROOM-32U, 32bits.
MCU Frequency: 240MHz
FLASH: 8192K Bytes
: 520K Bytes
Engraving Speed: PC Engraving: Supports
Offline Mode: Supports
LCD: Supports
Integrated : Supports
Web Page Control: Supports
Mobile APP Control: Supports
For GRBLaser: Supports
For LightBurn: Supports
A4988 Driver Introduction: A4988 is a complete micro stepper motor driver with built in converter, easy to operate. The bipolar stepper motor can operate in full step, half step, 1/4, 1/8, and 1/16 step modes, with an output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off time current regulator that is in slow or mixed decay mode. The A4988 converter is the key to easy implementation. The step input only requires one pulse to drive the motor forward one microstep. There is no phase sequence table, control line, or complex programming interface. The A4988 interface is very suitable for situations where complex microprocessors are unavailable or overloaded.
A4988 Driver Features and Advantages:
1. Low RDS on output.
2. Automatic current attenuation mode detection or selection.
3. Mixing with slow current decay mode.
4. Synchronous rectification, low power consumption.
5. Internal undervoltage lockout.
6. Cross .
7. 3.3 and 5 V compatible logic power supply.
8. Thermal shutdown circuit.
9. Earth fault .
10. Load short circuit .
11. 5 Available Stepper Modes: full step, 1/2, 1/4, 1/8, and 1/161.

How to Use:
Use according to the picture.

packing list:
1 xLaser Engraver Mainboard
3 x Driver
3 x Accessory
1 x Data Cable

ProductSiteLaunchDate : 2023-07-26T10:42:40.364Z
SupplierDeclaredDgHzRegulation : not_applicable
TotalPciEPorts : 3
TotalUsbPorts : 3
UnspscCode : 43201400