Cart 2 india

Specification
AgeRangeDescription : 8+
ArtCraftKitType : ART_CRAFT_KIT
Brand : Reci
BulletPoint : ATOMSTACK Laser Engraver
BulletPoint1 : RECI W2 Laser Tube: Rated Power 90W Max. 100W, Diameter: 80mm, Length: 1240mm. Please make sure that the laser machine has enough space to accommodate the W2 CO2 laser tube.
BulletPoint2 : Long lifespan: The RECI laser tube lifespan up to 10,000 hours,it ensures continuous machine operation and minimizes downtime. The RECI W2 power range is 80W - 100W,this 100 watt laser tube reci W2 with high quality, stability and performance. Higher efficiency for the laser engraving and cutting.
BulletPoint3 : Tips: The recommended current for the RECI W2 laser tube is 25mA. The long-term operating current should be controlled at 26mA or below. The maximum operating current must be controlled at 28mA or less. RECI W2 water-cooling tips: The coolant is pure water with a flow rate of 2-5 liters per minute and a standard water temperature of 10℃-50℃.
BulletPoint4 : The W series laser tubes are protected from dust by a metal cap and a red plastic cap on each end. You can remove the metal caps at any time to clean the laser lens.
BulletPoint5 : Wide Application: Reci laser tube possesses higer power than the same length laser tube. It is great for acrylic, cardboard, ceramics, fabric, glass, leather, paper, stone, wood and etc.
BulletPoint6 : NOTE: Each laser tube is tested before shipping and we will provide a safe packaging. If transportation damage, please contact our customer service to replace the defective one via Amazon. It is recommended to use a laser power supply that matches the laser tube.
Color : Transparent
ExternallyAssignedProductIdentifier1 : 642337974274
ExternallyAssignedProductIdentifier2 : 0642337974274
ExternallyAssignedProductIdentifier3 : 9075273131998
GemType : No Gemstone
IncludedComponents1 : Beads
IncludedComponents2 : Chain
IncludedComponents3 : Necklace cord
IncludedComponents4 : Gift box
ItemDisplayDimensions_Depth : 4.5 centimeters
ItemDisplayDimensions_Diameter : 4.5 centimeters
ItemDisplayDimensions_Height : 4.5 centimeters
ItemDisplayDimensions_Length : 53 centimeters
ItemDisplayDimensions_Width : 45 centimeters
ItemName : RECI CO2 Laser Tube 90W (Peak 100W) 1240mm W2/S2 18 Months Warranty Shipping from US Duty Free for Laser Engraving Cutting
ItemPackageDimensions_Height : 24 centimeters
ItemPackageDimensions_Length : 135 centimeters
ItemPackageDimensions_Width : 24 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : engraving-tools
Manufacturer : Reci
Material : Aluminum
Material1 : Plastic
Material2 : Acrylic
Material3 : Metal
MetalType : Zinc
ModelName : ATOMSTACK Laser Engraver
ModelNumber : LT-W2
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 150
OperationMode : Manual
PartNumber : LT-S2
ProductDescription : Features of RECI Laser Tube:

Stable power, less attenuation
Higher cutter efficiency, energy concentration
Longer service life, longer Maintenance period

Parameters

Diameter: 80mm
Rated Power: 90W
Max Power: 100W
Length: 1240mm
Lifespan: 10000h

Installation

1. Connect the positive and negative pole of laser tube and power supply, and insulate it properly.
2. Connect the inlet and outlet of the laser tube.
3. Turn on the water circulation, so that the cooling water through the entire water line, avoid air bubbles, otherwise there is a risk of burst pipes.
4. Start inching, the laser tube emit laser light, adjust the position of the laser tube so that the spot hit in the middle of the reflective mirror.
5. If the light path is not correct, adjust the position of the laser lens until light path adjustment is complete.
6. When the laser tube is first used, generally adjust 50%-60% of the power to work (can be adjusted according to the actual use of the situation).

RECI Laser Tube Light Problems Self-checking

First of all, please open the back cover to check the laser light, the normal light color is light pink.
If there are no issues with the light, but the processing effect is not ideal, please check the following aspects:
A. The output lens of the laser head is contaminated, please gently wipe with anhydrous alcohol.
B. Laser lens is contaminated, including 3 pieces of reflective mirrors and 1 piece of focus lens, please wipe with anhydrous alcohol or replace them.
C. The optical path is not adjusted well, the light does not shoot out from the laser head or the optical path is not perpendicular, please adjust the optical path again.
D. Laser power supply is damaged, although the laser tube is bright but weak, please adjust to the maximum light intensity, such as the ammeter value only shows below 10mA, the power supply is damaged, please replace the power supply.
E. Cooling system problems, water circulation is too slow, the laser temperature is too high, resulting in poor cooling effect, check the entire water circuit is not blocked (water pipe folding), the water pump or water chiller is damaged or not, please repair in time!
ProductSiteLaunchDate : 2016-04-17T07:00:00.000Z
Seasons : All Seasons
Size : W2 90-100W (US Stock)
Style : Laser
SubjectCharacter : Unicorn/mermaid
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : female
Theme1 : Fantasy
Theme2 : Animal
Theme3 : Religious
Theme4 : Love
Theme5 : Fashion
UnitCount : 10
UnspscCode : 32111500
WarrantyDescription : 1
Wattage : 100 watts