Cart 2 india

Specification
Brand : WTTTOOLS
BulletPoint1 : INTRODUCTION-WTTTOOLS dot peen marking machine achieves automatic marking without using a computer. Marking Depth: 0.02-1mm(depending on material). Marking Speed: 3-5 characters/s. Marking Area:4.7x2in. Power Supply: AC 110V/220V, 50Hz. Air Pressure: 0.4-0.5Mpa. Power Consumption: 100W. Operating Temperature: 1-40°C. Relative Humidity＜90%. Net Weight: 11kg/24.3lbs. Gross Weight: 14kg/30.9lbs. Package Dimension:24.2*14.1*9.9in.
BulletPoint2 : HIGH EFFICIENCY-This pneumatic engraver has a 7-inch built-in touch screen controller and you can set parameters conveniently. Besides, with a high-quality hard alloy marking needle, it can be used for marking the material that the hardness is less than HRC60 and can also provide you deep and permanent marks.
BulletPoint3 : EASY TO USE-This dot peen engraver has a compact design and a small volume which helps you carry easily. This pneumatic comes with a strong electromagnetic base that can be firmly attached to the surface of the magnetic workpiece so that you don't need to hold it by hand when you working.
BulletPoint4 : WIDE APPLICATIONS: The 100W dot peen marking machine can be widely used for it is graphics, text, product serial number, trademark, etc. It is often used in automobile, electronics, machinery industry, etc.
BulletPoint5 : CARING SERVICE: We provide 1 year warranty for the whole machine and lifetime online support. We will send by DHL/UPS around 7-10 days. If any questions, please pm us via Amazon, and we will try our best to make you satisfied.
Color : Yellow
ExternallyAssignedProductIdentifier : 6046575038585
ExternallyAssignedProductIdentifier1 : 0640823560482
ExternallyAssignedProductIdentifier2 : 640823560482
ItemName : US Stock 100W Portable Pneumatic Engraver Dot Peen Marking Machine 120X50mm(4.7X2inch) Engraving Area
ItemPackageDimensions_Height : 59.69 centimeters
ItemPackageDimensions_Length : 25.4 centimeters
ItemPackageDimensions_Width : 36.83 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : engraving-tools
Manufacturer : Luoyang Xincheng
Material : High Speed Steel
ModelNumber : 022-401
PartNumber : Z-MARKING-01/02
ProductDescription : This Onglette shape is flat on the top and has curved sides that come to a narrow, sharp point on the cutting edge. An Onglette can be used for cutting borders, inlay work, cutting lines with varying widths, line engraving, and stone setting techniques. Use with a Traditional QC Tool Holder (#004-803). Precision made from high-speed chrome tool steel.
ProductSiteLaunchDate : 2021-05-27T15:13:16.507Z
Size : 120X50mm engraving area
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27112700