Cart 2 india

Specification
Brand : INTBUYING
BulletPoint : Price for Pack of 3 pcs
BulletPoint1 : GREAT PERFORMANCE: The nitrogen blowing instrument is a high precision control instrument by microcomputer processing and PID control method are combined to form,its working principle is to fast,continuous and controllable nitrogen blowing to the heating surface of the sample with 12 number holes,according to the concentration of solvent evaporation rate and the boiling point, set the heating temperature, concentration of a large number of samples is real fast
BulletPoint2 : FAST AND UNIFORM HEATING: Dry nitrogen blowing instrument adopts aluminum block bath,which has good heat transfer and uniform heat transfer, which is beneficial to rapid heating and rapid temperature control.The nitrogen is blown to the surface of the sample to achieve the oxygen free concentration of the liquid sample.The blowpipe is independent of each other.Each air pin channel on the gas assembly can be used in combination or used alone
BulletPoint3 : HIGH PRECISION: The Nitrogen Purging Machine has high temperature control precision with wide range of temperature control 5℃-150℃.Temperature error calibration adopts multipoint temperature calibration method.Synchronous linear system keeps the other temperature accuracy is less than 0.5 DEG C.The temperature of the environment and the temperature of the module must be below 35 C when the temperature is calibrated
BulletPoint4 : EASY TO USE: The control panel include temperature setting key,Run and stop key,Timing Time is A maximum of 99 hours 59 minuteswhich is intuitive and simple,you can set the working time and temperature,the data display at a glance,simple and convenient operation
BulletPoint5 : APPLICATION: The main application fields of this product is to analysis vegetables,fruit,grain,drinking water,groundwater and reference water samples,liquid and gas samples for food and beverage analysis of the preparation
ExternallyAssignedProductIdentifier1 : 0748497593680
ExternallyAssignedProductIdentifier2 : 748497593680
IncludedComponents : The Power Cordx1/Nitrogen Connection Pipe x1/Fuse x3
ItemName : INTBUYING Termovap Nitrogen Sample Concentrator Dry Heated Nitrogen Evaporator 12 Holes Dry-Type Dry Nitrogen Blowing Machine Nitrogen Concentrator LED Display 110V
ItemPackageDimensions_Height : 10.63 inches
ItemPackageDimensions_Length : 16.93 inches
ItemPackageDimensions_Width : 16.54 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-evaporator-accessories
Manufacturer : INTBUYING
Material : iron
NumberOfItems : 1
PartNumber : 056481
ProductDescription : Product Parameters
Voltage:AC110V 50/60Hz
Heating Power: 200W
The Number of Holes:12
The Diameter of Each Hole:0.63"(16mm)
Gas Needle Length:5.9"(15cm)
Temperature Range:Room Temperature 5℃-150℃
Timing Time:A maximum of 99 hours 59 minutes
Control Accuracy:≤±0.5℃
Display Precision: ±0.1℃
Maximum Gas Pressure: 0.02Mpa
Package Size:16.9"*16.5"*10.6"(43cm*42cm*27cm)
Net Weight:12.1LB(5.5kg)
Item Included(056481)
Termovap Sample Concentrator *1
The Power Cord *1
Nitrogen Connection Pipe *1
Fuse *3
ProductSiteLaunchDate : 2020-03-05T07:38:59.558Z
Voltage : 110 volts_of_alternating_current
Wattage : 200 watts