Cart 2 india

Specification
Brand : CNCEST
BulletPoint1 : ✅【High-quality Material】The POM plastic steel has good resistance to deformation or corrosion, allowing you to use it for a long time.
BulletPoint2 : ✅【Health-Guard】Its filtration system consists of a cotton outer filter, central HEPA filter, and inner activated carbon filter, which can adsorb visible particles, 99.99% invisible particles, and harmful gases, allowing you to work with peace of mind without worrying about the harm of harmful gases.
BulletPoint3 : ✅【Efficient Purification】The suction of the product can be adjusted infinitely within the range of 0-7945.8ft³/h. The special foam on the cover can enhance the sealing of the product and achieve efficient air purification.
BulletPoint4 : ✅【Flexible Use】The 31.5-inch extraction tube can be bent or tilted at any angle, allowing you to absorb harmful gases from different directions, making it more flexible to use.
BulletPoint5 : ✅【Easy to Use】The simple structure, detailed manual, and convenient air volume control knob allow you to quickly master this machine and start to use it.
IncludedComponents : 1 x Fume Extractor, 1 x Power Cord,1 x Medium Efficiency Filter, 1 x High Efficiency Filter, 5 x Primary Filters,1 x Extraction Tube
ItemName : CNCEST Fume Extractor, Smoke Purifier for Soldering, Strong Smoke Absorber Filtration
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : fume-and-smoke-extractors
Manufacturer : Wirance
Material : rubber
ModelName : Fume Extractor
ModelNumber : JZON9D-000300US
PartNumber : Generickt21g589sw
PowerSourceType : electric corded
ProductDescription : Specification Material: Silicone, POM Plastic Steel, Activated Carbon, Rubber Color: White Mount Type: Tabletop Motor Type: DC Brushless Motor Filtering Type: Adsorption Filtration Filter Element Type: Cotton, HEPA, Activated Carbon, Effective Absorption Distance: About 15cm/5.91in Number of Filter Layers: 3 Power Type: Corded Electric Plug Type: US Standard Voltage: AC110V 50Hz Power: 100W Noise: <45dB Air Volume: 0-225m³/7945.8ft³/h Filtering Effect: 3μm 99.99% Air Inlet Interface Diameter: 7.5cm/2.95in Extraction Tube Diameter: 7cm/2.76in Extraction Tube Length: 80cm/31.5in Product Size: 29*24.5*32.5cm/11.42*9.65*12.8in Package Size: 43*34*32cm/16.93*13.39*12.6in Gross Weight: 8.5kg/18.74lbs Net Weight: 8kg/17.64lbs Features: Non-slip Feet: The four non-slip rubber feet ensure higher stability, avoid scratching the floor, and raise the bottom for better ventilation. Sturdy Buckle: It can fully seal the fume extractor during operation to avoid leakage and allow you to simply open the lid to replace the filter. Silicone Smoking Hood: It has good high-temperature resistance and can adapt to industrial soldering. Quiet Use: Its operating noise is less than 45dB, equivalent to ordinary indoor conversations, which will not cause too much noise, allowing you to have a quieter operating environment. Wide Application: This product is suitable for soldering, soldering iron, and laser beauty fields, and is used to filter substances such as smoke, dust, particles, rosin, hair, and pollutants. How to Change the Filter 1. Open the buckle and remove the cover. 2. Take out the three used filter elements and replace them with a new set. 3. Close the lid, fasten the buckle, connect the power, and start using it. Package Included 1 x Fume Extractor 1 x Power Cord 1 x Medium Efficiency Filter 1 x High Efficiency Filter 5 x Primary Filters (One Already Installed In The Product) 1 x Extraction Tube 1 x English Manual
ProductSiteLaunchDate : 2024-05-30T05:19:48.480Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 23271700