Cart 2 india

Specification
Brand : LingGan
BulletPoint1 : The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products.
BulletPoint2 : Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head.
BulletPoint3 : The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load. The wire screw sleeve is installed at the screw and you no longer worry about bad teeth.
BulletPoint4 : Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good.
BulletPoint5 : High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance.
CutType : Face Cut
EndCutType : Face Cut
ExternallyAssignedProductIdentifier : 8424602304175
FinishType : DLC
HelixAngle : 3E+1 degrees
ItemName : Face Milling Cutter Holder 90 Deg 400R 63-22+R8-FMB22-7/16+APMT1604 Hard Alloy Blade+8mm Spanner+T15 Spanner, Used for Fough Machining of The Workpiece on The Milling Machine.(2.48 inches in diameter)
ItemPackageDimensions_Height : 20.5 centimeters
ItemPackageDimensions_Length : 7.2 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemShape : Round
ItemTypeKeyword : face-mill-holders
Manufacturer : LingGan
Material : Steel (Face Milling Cutter Holder) + Carbide (Turning Insert)
ModelNumber : 400R 63-22 + R8-FMB22 + APMT1604
NumberOfCuttingEdges : 5
NumberOfFlutes : 5
NumberOfItems : 1
PartNumber : 2020-06-18-15-25
ProductDescription : It is preferably steel, which has wear resistance and tensile strength, and is suitable for the processing of flat surfaces, steps, profiling surfaces and grooved surfaces. Blade, cutter disc, tool handle, trinity, tight fit, durable. The matching hard alloy blade can process steel parts and stainless steel.
ProductSiteLaunchDate : 2020-06-18T07:33:02.138Z
Size : 400R 63-22 (2.48 Inch)
Style : AL KM12 80-22 (3.15 Inch)
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 44103100