Cart 2 india

Specification
Brand : Jecoupoon
BulletPoint1 : Product data: 400R-50-22-4T Face Mill Cutter: 50mm/2in Cutting Diameter, 4 Flutes, 22mm/0.87In Bore Diameter.
BulletPoint2 : Function: Machining plane, slot and cutting workpiece on milling machine. Can freely change the blade, adjust the Angle, milling speed, high processing efficiency, superior quality.
BulletPoint3 : Material: Made of excellent steel, high hardness, strong sustainability, the blade is made of cemented carbide, hardness HRC30-55, with high hardness and wear block.
BulletPoint4 : Application scenario: Can be used for vertical milling machine, face milling machine, gantry milling machine and other plane processing, can also be chamfer and bevel processing, remove the remaining material at the bottom of the groove, make the bottom of the groove more flat and so on.
BulletPoint5 : Suggestion: During processing, rough milling can be carried out first, and then fine milling, and parameters such as cutting speed, feed rate and cutting depth can be reasonably selected to ensure processing quality and efficiency, and the appropriate use of coolant can help improve tool life.
CutType : Center Cutting
EndCutType : Square End
FinishType : Unfinished
ItemName : Jecoupoon R8 Shank FMB22 7/16-20UNF Face Mill Arbor, 400R 50MM End Milling Shell Cutter, 10Pcs APMT1604 Carbide Inserts and T15 Wrench
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 8.6106 centimeters
ItemPackageDimensions_Width : 11.5062 centimeters
ItemShape : Round
ItemTypeKeyword : face-mill-holders
Manufacturer : Jecoupoon
Material : Steel, Cemented Carbide
Material1 : Steel
Material2 : Tungsten Carbide
ModelNumber : 202-5372
NumberOfCuttingEdges : 4
NumberOfFlutes : 4
PartNumber : JE-468750-784291-CU
ProductDescription : This product is suitable for processing a variety of materials, including but not limited to cast iron, non-ferrous metals, cast iron, hard steel, stainless steel and other metal materials, the following points should be noted when using:

Rough milling and finish milling: Rough milling can be done first to remove most of the remaining material, and then finish milling to obtain a smoother surface.

Cutting parameters: reasonable selection of cutting speed, feed and depth of cutting parameters to ensure processing quality and efficiency.

Tool selection: Select the appropriate face milling cutter material according to the processing material and processing requirements.

Cooling lubrication: The proper use of coolant helps to increase tool life and improve the quality of the machined surface.

You will get:
1 x R8 FMB22 Arbor
1 x 400R 50mm Cutter
1 x T15 Wrench
10 x APMT1604 Carbide Inserts as pictured
 
ProductSiteLaunchDate : 2024-08-09T02:06:16.752Z
Size : 3 in
Style : RCKT1606
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803