Cart 2 india

Specification
Brand : Shars
BulletPoint1 : Maximum Cutting Diameter: 3.52
BulletPoint2 : Axial Depth of Cut AP: 0.236
BulletPoint3 : Overall Length: 5.56
BulletPoint4 : Insert Style: SEHT, SEHW, SEKT
BulletPoint5 : Insert Size: 1204
BulletPoint6 : Only compatible with ZCC USA and Shars APKT inserts
CutType : Square
EndCutType : Square End
ExternallyAssignedProductIdentifier : 6941110112341
ExternallyAssignedProductIdentifier1 : 0000740423893
ExternallyAssignedProductIdentifier2 : 000740423893
ExternallyAssignedProductIdentifier3 : 00769053080246
FinishType : Nickel
IncludedComponents : R8 FMB22 Arbor; KM12 50-22-4T; T15 Wrench; 10xSEKT1204 Carbide Inserts
ItemName : Shars 3" 45° Indexable Face End Mill R8 Arbor 3FL SEHT + Certificate 404-2389W P[
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : face-mill-holders
Manufacturer : Shars Tool
Material : black oxide
ModelNumber : FMAR814S
NumberOfFlutes : 4
NumberOfItems : 1
PartNumber : 404-2389W
ProductDescription : Suitable for most face milling applications / Reduces vibration on long overhang applications / Chip thinning effect allows for increased table feeds / High Positive cutting geometry / Benefit from the 45 degree lead angle allows an increase of feedrate by 50% over 90 degree face mill and also allows this face mill to used on smaller horse power mills. It uses industry standard SEHT / SEHW / SEHX 43 (ISO 1204) insert which has a positive 20 degree clearance angle. The insert pockets are designed to be 19 degree positive inclined to minimize vibration and each pocket has an chip escaping pathway to help preventing chip built-up on insert edge. / Each insert pocket is designed to reduce run-out and extent insert life. / Use SEKT / SEHT / SEHW 43 1204 insert (INSERT NOT INCLUDED) / Easy reference guide for insert number, screw, and other accessories is printed on the tool / Cutting Diameter: 3 / Shank Size: R8 / Number of Flutes: 4 / Cutting Angle: 45 /
ProductSiteLaunchDate : 2023-08-11T13:39:15.920Z
Size : 2" BT30 404-2972
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
ToleranceHeld : Precision
UnitCount : 1