Cart 2 india

Specification
Brand : zouzmin
BulletPoint1 : 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert.
BulletPoint2 : Application: this kind of APMT1604 milling inserts are especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC35 °- HRC50°ï¼Œperform pretty well on quenched harden steel.
BulletPoint3 : Dual-edge APMT1604 PDER R0.8 :Coating: CVD , APMT1604PDER are coated by NANO blue coating,Material: Carbide, I.C(d): 0.366", Thickness(s): 0.187",Hole(d1): 0.173",Nose radius(r): 1/32",Nose Angle: 85°,Relief Angle: 11°,Good for both finishing and roughing;
BulletPoint4 : R8 FMB22 Face Mill Arbor--Made from alloy steel hardened to HRC 52-56,For shoulder milling, face milling and slotting,7/16-20 thread on the draw bar
BulletPoint5 : Package list:1pcs 2" R8-FMB22 face mill arbor + 1pcs 400R 50-22-4T Milling holder + 10pcs APMT1604PDER BP010 carbide inserts + 1pc T15 Wrench
BulletPoint6 : Only compatible with ZCC USA and Shars Tool SEHT inserts
BulletPoint7 :
BulletPoint8 :
Color : As Shown
CornerRadius : 0.8 millimeters
CutType : Center Cutting
CutType1 : Center Cutting
CutType2 : Square
CutType3 : Finishing
EndCutType : Center
ExternallyAssignedProductIdentifier1 : 025128350639
ExternallyAssignedProductIdentifier2 : 0025128350639
FinishType : TiAlN, AlTiN
HelixAngle : 90 degrees
IncludedComponents : Face Mill Arbor+APMT1604PDER Inserts+Face Mill Milling Holder
ItemName : zouzmin 2inch R8-FMB22 Face Mill Arbor and BAP400R 50-22-4T 50mm/1.96" Face Milling Holder CNC End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 Shank Carbide Inserts
ItemPackageDimensions_Height : 2.75 inches
ItemPackageDimensions_Length : 7.87 inches
ItemPackageDimensions_Width : 5.31 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : face-mill-holders
Manufacturer : zouzmin
Material : Carbide
Material1 : Steel
Material2 : Tungsten Carbide
ModelNumber : R8-FMB22+BAP400R 50-22-4T+APMT1604PDER
NumberOfCuttingEdges : 4
NumberOfFlutes : 4
NumberOfItems : 1
PartNumber : zouzmin
ProductDescription : 2inch R8-FMB22 Face Mill Arbor + BAP400R 50-22-4T 50mm/1.96" Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 Shank Carbide Inserts
ProductSiteLaunchDate : 2024-08-21T06:39:29.627Z
ShipsGlobally : 1
Size : 3 in
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803