Cart 2 india

Specification
AutoPartPosition1 : rear
AutoPartPosition2 : front
Brand : Keenso
BulletPoint1 : 【Dustproof & Windproof】- Mountian prevents the fork, frame from the dust, mud, stones, etc. A must for riding in mud or rain.it is better to reduce the wind and keep your back from getting soggy and soaking when you ride on a muddy road
BulletPoint2 : 【Easy to Adjust】- Mudguard is cold and heat resistant, telescopic, which is easy to adjust the angle between mudguard and tire, no any repair tools required,easy to install and remove
BulletPoint3 : 【Sturdy & Front/Rear Mud Guards are made of PA environmental , lengthening and widening design,which is plastic, sturdy, strong and to use
BulletPoint4 : 【Useful & Effective】- Mudguard Fenders Set is an useful and practical fender, convenient to use,which is a great accessory for cycling lovers
BulletPoint5 : 【Specifications】-- Condition: Brand NewItem Type: Mudguard, Material: PA environment-friendly plastics, Rear size: approx. 405x70mm/15.9x2.8inch, Front size: approx. 295x60mm/11.6x2.4inch, Applicable size: 16/18/20/22/24/26/700C, Applicable tube diameter: 25.4-34.9mm, Apply front fork inner diameter: 20-28mm
CompatibleWithVehicleType : Bicycle
ExternallyAssignedProductIdentifier1 : 0738583860383
ExternallyAssignedProductIdentifier2 : 738583860383
FinishType : Powder Coated
FitType : Universal Fit
InstallationType : Screw-In
ItemName : Keenso Front/Rear Mud Guards, Mudguard Fenders Adjustable Lengthening Widening Mudguard Mud Fenders Set for Riding in Mud or Rain
ItemPackageDimensions_Height : 16.1 centimeters
ItemPackageDimensions_Length : 4.1 centimeters
ItemPackageDimensions_Width : 13.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bike-fenders
Manufacturer : Keenso
Material : Plastic
PartNumber : Keensoparx3y4nv2
ProductDescription :

Specification:

Condition: Brand New
Item Type: Mudguard
Material: PA environment-friendly plastics
Color: as picture shown
Rear size: approx. 405x70mm/15.9x2.8inch
Front size: approx. 295x60mm/11.6x2.4inch
Applicable size: 16/18/20/22/24/26/700C
Applicable tube diameter: 25.4-34.9mm
Apply front fork inner diameter: 20-28mm
Installation steps of front fender:
1. Fix the expansion plug on the connecting piece (the bottom of the expansion plug is stuck in the slot of the connecting piece)
2. Insert the expansion plug into the front fork hole and tighten the screw until the plug is stuck tight
Note: standpipe expansion plug is suitable for front fork hole diameter of 20-28mm
Installation steps of rear fender:
1. Put the clamp sleeve on the seat tube and tighten the screw (add washer according to the specification of the seat tube)
2. Connect the corresponding end of the and tighten the screws

Package List:

1 Set of Mudguard (Front & Rear) 1 x Manual
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172600