Cart 2 india

Specification
Brand : binoa
BulletPoint1 : Prevent plugged airlocks or blow-off tubes during fermentation!
BulletPoint2 : No evaporated air lock! No backflush of sanitizer into your product!
BulletPoint3 : Think of this as a GIANT airlock… with all of the benefits and none of the draw-backs of small plastic airlocks!
BulletPoint4 : DAISY CHAIN this with our GROMMETED VERSION to create a CO2 harvesting, back flow-preventing airlock
BulletPoint5 : Made in USA by NorCal Brewing Solutions
Capacity : 65 liters
Capacity1 : 2 gallons
Capacity2 : 1 gallons
Capacity3 : 5 gallons
Color : Stainless Steel
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 5904816915457
ExternallyAssignedProductIdentifier1 : 0693062095666
ExternallyAssignedProductIdentifier2 : 693062095666
GpsrSafetyAttestation : 1
ItemDisplayDimensions_Depth : 4 inches
ItemDisplayDimensions_Diameter : 5 inches
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 4 inches
ItemDisplayDimensions_Width : 4 inches
ItemDisplayWeight : 5 ounces
ItemLength : 0.625 inches
ItemName : NorCal Brewing Solutions KRAUSEN CATCHER with 4 Nipples for Wide Mouth Canning Jars
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : brewing-and-venting-fermenters
Manufacturer : NorCal Brewing Solutions
Material : Stainless Steel
ModelNumber : 2841
NominalWallThickness : 0.0625 inches
NumberOfItems : 1
PackageLevel : unit
PartNumber : 2841
ProductDescription : NorCal Brewing Solutions Krausen Catcher with 4 Nipples for Ball, Kerr, or Mason Wide-Mouth Canning Jar. One-of-a-kind Krausen Catcher for your fermenter is the ultimate airlock replacement / blow-off tube! The Krausen Catcher fixes ALL kinds of fermentation blow-off issues by providing sturdy hose attachments, a lid-sealed containment system, and the ability to attach 1/2" hoses to any of its 4 connections! Think of this as a GIANT 3-piece airlock… with all of the benefits and none of the draw-backs! All you need is a couple of feet of 1/2" inner diameter tubing and a wide mouth Kerr, Ball, or Mason jar (not included) in the 16, 32, or 64 ounce size. DAISY CHAIN THIS WITH OUR GROMMETED VERSION OF THE KRAUSEN CATCHER to create a CO2 harvesting, back flow-preventing airlock. USAGE INSTRUCTIONS: 1. Fill a wide-mouth canning jar with the proper amount and mix of sanitizing solution 2. Place a length of tubing over one of the “inside” nipples of the Krausen Catcher. Tube length should be long enough to “almost” reach the bottom of the canning jar once canning jar lid is attached to jar. 3. Place Krausen Catcher on canning jar and tighten the canning jar’s lid over the Catcher 4. Attach a half-inch inner diameter hose over the same-side outside nipple on the Krausen Catcher 5. Run the other end of the hose to the CO2 exit port of your fermenter CHARACTERISTICS and SPECIFICATIONS: 304 Stainless Steel 1/2" inner diameter tubing connects to any of the 4 nipples Works with any “wide mouth” (3-inch inner opening) Ball, Kerr, Mason or equivalent canning jar. PLEASE NOTE: 1/2” inner diameter tubing refers to VINYL tubing. You can use 3/8” inner diameter SILICONE tubing instead, since it stretches nice and holds tight. PLEASE NOTE: Canning jar, screw lid, hose, etc. are for illustration purposes only, and are not included! SHOWN ATTACHED TO A CANNING JAR IN THE RIGHT-SIDE OF THE LAST PICTURE.
ProductSiteLaunchDate : 2016-09-29T07:00:00.000Z
Size : One Size
StreetDate : 2017-08-11T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52150000