Cart 2 india

Specification
Brand : GAGOM
BulletPoint1 : Package - 1pc of ss compression fitting, the fitting are available in a wide range of size ( E.G. The 8mm x 4mm means OD x THREAD )
BulletPoint2 : Material -- Crafted from robust 304 stainless steel, the Steel Compression Tube Fitting boasts high-temperature ductility, low magnetic permeability, and exceptional wear resistance, ensuring durability and reliability.
BulletPoint3 : Precision Engineering -- Available in a range of precise sizes, Stainless Steel Compression Fittings feature meticulous craftsmanship, resulting in a smooth exterior far from burrs, guaranteeing a seamless fit.
BulletPoint4 : Reliable Durability -- Compression tube Fitting offers wear-proof reliability, safeguarding your brake lines from damage even in challenging conditions.
BulletPoint5 : Wide Application -- Stainless Compression Fittings are extensively utilized in hydraulic and pneumatic systems, facilitating the connection of lines for air, water, fuel, oil, and inert gases. They are versatile connectors suitable for joining copper, brass, aluminum, or plastic pipes.
Color : One Color
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 9396983992526
ItemName : Male NPT Double Ferrule, Ss 316 Compression Tube Fitting 30MPa, Fitting For 1/8 1/4 3/8 1/2 Inch 6 8 10 12mm Replace Lok(6 MMx3/8 IN)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : compression-fitting-ferrules
Manufacturer : GAGOM
ModelName : GAGOM
ModelNumber : GAGOM
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : GAGOM
ProductDescription : Male NPT Double Ferrule, Ss 316 Compression Tube Fitting 30MPa, Fitting For 1/8 1/4 3/8 1/2 Inch 6 8 10 12mm Replace Lok

Material - 316 Stainless Steel
Working Pressure - 6000 psig
M means Male thread
F means Female thread

Size Meaning
0.125 in -- 1/8"
0.25 in -- 1/4"
0.375 in -- 3/8"
0.5 in -- 1/2"
0.75 in -- 3/4"
1 in -- 1"

Application
For inert gas, reactive, flammable, oxidizing and corrosive gases and gas mixtures, Purity max. 6.0.
Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.

Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction
1. Firmly insert the tubing until it bottoms in the fitting body.
2. Finger tighten the nut.
3. Mark the nut at the 6 o'clock position, with pencil or scribe.
4. Hold the body with a backup wrench, or vice, then tighten nut.
5. 1-1/4 turns to the 9 o'clock position.
6. The above applies to all fittings from 1/4"to 1"(6mm to 25mm).
7. Fittings from 1/16" to 3/16" (3mm to 4mm), only 3/4 turn is required.

Package list - 1pc x ss compression tube fitting

Note
1.Please allow 1-5mm errors due to manual measurement,thank you.
2.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
ProductSiteLaunchDate : 2024-11-09T12:27:06.196Z
Size : 6 MMx3/8 IN
UnitCount : 1
UnspscCode : 30180000