Cart 2 india

Specification
Brand : PneumaticPlus
BulletPoint : GENUINE PART
BulletPoint1 : Max. Supply Pressure: 250 PSI, Max Operating Pressure: 150 PSI
BulletPoint2 : 3/4" NPT, 10 Micron Element Stanard- T-Handle Operated, 300 SCFM @ 90 PSI
BulletPoint3 : Manual Drain & Metal Bowl with Bowl Guard/Includes 0-150 PSI Pressure Gauge & Bracket
BulletPoint4 : Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off.
BulletPoint5 : Manufacturerd In Korea
ExternallyAssignedProductIdentifier1 : 0841693107672
ExternallyAssignedProductIdentifier2 : 841693107672
IncludedComponents : 1 ELEMENT KIT
ItemName : PneumaticPlus SAU620T-N06G-MEP High Flow Air Filter Regulator Combo 3/4" NPT -T-Handle, Manual Drain, Metal Bowl
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 18 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : compressed-air-combination-filters-and-regulators
Manufacturer : PneumaticPlus
Material : Plastic
Material1 : borsosilicate glass microfibers with fluorocarbon resin binder
Material2 : borsosilicate glass microfibers with fluorocarbon resin binder
Material3 : borsosilicate glass microfibers with fluorocarbon resin binder
Material4 : borsosilicate glass microfibers with fluorocarbon resin binder
Material5 : borsosilicate glass microfibers with fluorocarbon resin binder
ModelNumber : 4ZL17
NumberOfItems : 1
PartNumber : SAU620T-N06G-MEP
ProductDescription : Installation Install units so the airflow is in the direction “IN-OUT” as indicated by arrow on the head of the unit. Install filter first in line of additional units such as regulators or lubricators, and as close as possible to the pneumatic tools or appliances being serviced. Unit must be installed in parallel from floor, downstream position for proper function. Do not install polycarbonate bowl in pressure that exceeds 150 PSI or where there is a presence of solvents harmful to polycarbonate. In these cases, use a metal bowl. The Unit can dis-assemble or assemble using a Phillips-head screwdriver or Allen wrench. An insert feature allows simple installation and removal in any location without disturbing the existing piping arrangement. The regulator can be mounted in either up or down position. This unique design allows unlimited adaptation to air preparation systems. Unit will permit use of standard size pipe nipples. Operation & Adjustments Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off. Sediment should not be permitted to fill above the lower baffle. Wash filter element at intervals with methylene chloride or similar cleansing fluid to maintain filtering efficiency. To clean element, depressurize system, unscrew polycarbonate bowl and unscrew element from head. Dry filter element thoroughly before reassembling. Clean filter bowl(s) only with soapy water. Inspect O-ring, replacing if damaged or distorted. Reassemble with care to avoid stripping threads on bowl. After a metal bowl with sight is tightened, it may be rotated up to 180 (for proper viewing.) Before supplying the air, turn the adjusting knob counter-clockwise until compression is released from the control spring. Turn on the air supply and adjust the knob to set the desired secondary pressure by turning the knob clockwise.
ProductGrade : Performance Part
ProductSiteLaunchDate : 2014-02-10T08:00:00.000Z
Size : 3/4" NPT
SkipOffer : 1
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 46100000
WebsiteShippingWeight : 5 pounds