Cart 2 india

Specification
Brand : Kongsen
BulletPoint1 : Product name: Ceiling nail tool
BulletPoint2 : Material: stainless steel, alloy steel
BulletPoint3 : Head weight: 1.8KG
BulletPoint4 : Product features: double-layer silencer, automatic slag discharge
BulletPoint5 : Silence level: strong
Packing size: 63*30*10cm
Color : M10
ExternallyAssignedProductIdentifier : 7424751515553
ExternallyAssignedProductIdentifier1 : 0779584121578
ExternallyAssignedProductIdentifier2 : 779584121578
IncludedComponents : nail
ItemDisplayDimensions_Height : 0.24 inches
ItemDisplayDimensions_Length : 2.52 inches
ItemDisplayDimensions_Width : 0.24 inches
ItemDisplayWeight : 0.35 pounds
ItemName : 100 Pcs Ceiling Nails are Suitable for Integrated Ceiling, Gypsum Board, Bridge, Pipe Installation, Wooden Keel Ceiling (M10)
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 4.33 inches
ItemPackageDimensions_Width : 3.15 inches
ItemTypeKeyword : collated-finish-nails
Manufacturer : Kongsen
Material : iron
Material1 : Copper
Material2 : Iron
ModelNumber : 3421J7KQR8S03F825TA590X
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPieces : 4810
PartNumber : Kongsen-01
ProductDescription : Parameters:
Product name: Ceiling shot
Material: stainless steel, alloy steel
Gun head weight: 1.8KG
Pole weight: 0.3KG/ per one
Product features: double-layer silencer, automatic slag discharge
Silence level: strong
Packing size: 63*30*10cm
Scope of application: light steel keel, wood, water and electricity, pipeline, air conditioning, bracket installation, bridge, monitoring, anti-theft window, etc.
Applicable shooting nails: ceiling nails, 32mm fire nails, 42mm wood keel nails, pipe clamp nails, L-shaped wood keel nails, 47 wood keel nails, etc.

Precautions:
Instructions for use:
1. Adjust the tool length according to the construction height;
2. Reload
3. Accurately locate and maintain vertical and close contact with the basic
4. Push and release quickly, quickly retract the cartridge case after use and reset it for secondary operation

Safety Precautions:
1. Use a nail gun to work in protective clothing, wear protective gloves, and dust-proof goggles.
2. When using the nail gun, no one can shoot on the back of the substrate. In order to prevent the nail gun or the fragments of the substrate from flying out, it may cause personal injury.
3. It is strictly forbidden to aim the nail gun at the hard base for empty operation, so as not to damage the needle;
4. If dumb bullets occur, hold them for a few seconds and then gently remove the combination pendant. It is strictly forbidden to shoot the nailer at yourself or others;
5. When working, the nail shooter and the base surface of the hit are kept vertical, and when the inclination angle is large, it is prone to jump nails and the combined pendant is not firm.

Common faults and troubleshooting methods:
1. Dumb bullet: the needle is damaged (replace the needle); the needle and sleeve are stuck (the needle and sleeve have carbon deposit plastic slag, which should be removed and
ProductSiteLaunchDate : 2020-12-18T02:55:32.548Z
Size : A9
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31162000