Cart 2 india

Specification
Brand : Diginex
BulletPoint1 : This jumper module is used with our SignaLink USB p/n SLUSB8R, or our SLCAB8R radio cable.
BulletPoint2 : It is compatible with virtually all Kenwood and Alinco radios that have an 8-pin round type Mic jack.
BulletPoint3 : See product description below for a list of compatible radios.
BulletPoint4 : Compatible with Radtel Model: RT-490 RT-470 RT-470L RT-470X RT10 RT12 RT-890 RT-830 RT-850 RT-420 RT518 8800 Plus UV9D AR-869 jc-8629
BulletPoint5 : 2-pin Kenwood type connector compatible with most two-way radios on the market.
Color : Black
CompatibleDevices : Speaker
ConnectivityProtocol : Radio Frequency
ConnectivityTechnology : Auxiliary
ConnectorGender : Male-to-Male
ConnectorType : USB Type A
ControllerType : Battery powered
ExternallyAssignedProductIdentifier1 : 0712265203682
ExternallyAssignedProductIdentifier2 : 712265203682
FrequencyRange : 26.965 MHz - 27.405 MHz
IncludedComponents : 1 x G-950, 1 x Remote Control, 1 x Cable
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InternationalProtectionRating : IPX4
IsWaterproof : FALSE
ItemName : Tigertronics SLMOD8RK Plug & Play Jumper Module for Tigertronics SignaLink USB SLUSB8R or SLCAB8R Radio Cable
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : fixed-mount-cb-radios
Manufacturer : Tigertronics
ModelNumber : SLMOD8RK
MountingType : plug mount
NumberOfChannels : 40
PartNumber : SLMOD8RK
Pattern : Radio + Speaker
PowerSourceType : Corded Electric
ProductDescription : SLMOD8RK - This jumper module is compatible with virtually all KENWOOD and ALINCO radios that use an 8-pin round type Mic jack. This includes but is not limited to the radios listed below.

KENWOOD

• TM-201/211/221/231
• TM-241/2530/2550
• TM-2570
• TM-321/331/3530/401
• TM-421/431/441/521
• TM-531/541/621/631
• TM-701/721/731
• TR-50/751/851
• TS-50/60/140/430/440
• TS-450/570/660/670
• TS-680/690/701/711
• TS-780/790/811/850
• TS-870/930/940/950
• TS-2000
• TW-4000/4100

ALINCO

• ALD-24T
• ALR-22T/22HT/72T
• DR-110T/112T
• DR-130T/135E/135T
• DR-150/235T
• DR-430T/435E/435T
• DR-510T/570T
• DR-590T/592T/599T
• DR-600T /610E/610T
• DR-620E/620T
• DX-70T /70TH/70EH
• DX-77
• DX-SR8T/E
• DX-SR9

PWR / SPKR Jumper Settings - To maintain compatibility with as many radios as possible, this jumper module has two small jumpers that can be set to enable Power and Speaker Audio.

PWR - This jumper is *NOT* used with the SignaLink USB, but can be installed to power the older SignaLink SL-1 or SL-1+ model from your radio if there is sufficient power available on Pin #5 of the Mic connector (check your radio manual).

SPKR - This jumper should only be installed if your radio has Speaker Audio on Pin #6 of the Mic jack (check your radio manual). If Speaker Audio isn't available, then you'll need to connect an audio cable between the radio and the SignaLink as described in the SignaLink Installation Manual.
ProductSiteLaunchDate : 2018-06-14T19:46:11.659Z
SpeakerSize : 5.5 inches
Style : Radtel RT-860 With Programming Cable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TunerTechnology : Ssb
UnitCount : 1
UnspscCode : 52161500
Voltage : 12 volts_of_direct_current
WaterResistanceLevel : not_water_resistant