Cart 2 india

Specification
Brand : BoltsandNuts.com
BulletPoint1 : Diameter/Pitch: 3/8-16" Threads: Coarse
BulletPoint2 : Wrench Size: 9/16" | Nut Thickness (Max): 0.347"
BulletPoint3 : Locking Feature: None
BulletPoint4 : Material: Grade 8
BulletPoint5 : Finish: Black Phosphate & Oil
Color : Black
DriveSystem : External Hex
ExteriorFinish : Black
ExternallyAssignedProductIdentifier1 : 030656001175
ExternallyAssignedProductIdentifier2 : 0030656001175
ExternallyAssignedProductIdentifier3 : 00030656001175
FinishType : Black
GradeRating : grade 8
ItemName : (50) 3/8-16 Hex Flange Nuts Grade 8 Phos & Oil
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemShape : Flange
ItemTypeKeyword : flange-nuts
Manufacturer : BoltsandNuts
Material : Steel
MeasurementSystem : Inch
MetalType : Stainless Steel
ModelNumber : FBFHN832P50
NumberOfItems : 50
PartNumber : 37CNHF8PFS-2091
ProductDescription : Titan flange alignment pins from SMP are safe, fast, and effective. The Titan flange alignment pin’s tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes. Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches. Find the best bolt hole to insert 1 bolt-hole specific pin, turn 180 degrees, then insert the second bolt-hole specific pin and turn it 180 degrees to line up any size and series of flange. To remove Titan Flange Alignment Pins, simply rotate each pin another 180 degrees. At that point you should be able to remove each pins easily by hand. Titan flange aligning pins are sold both individually and in sets. The SMP-FTS212 and SMP-FTS1426 sets come in a custom-made, foam-lined kit. Titan flange alignment pins are also available in extra-long “L” versions for situations with a blind in between companion flanges. The Titan flange alignment pin SMP-FTS212 set is also available in an SMP-FTS212L kit. Titan flange alignment pin sizes range from 3/8” bolt-hole diameter to 3-5/8” bolt-hole diameter, in regular and extra-long lengths. Titan flange alignment pins are made from 4140 heat treated steel and are then Cadmium plated to provide superior strength and non-sparking capability. Titan flange alignment pins from SMP are the fastest and easiest way to line up bolt holes on companion flanges. Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment. The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market. PLEASE NOTE- This listing is for an individual pin ONLY. It is recommended that you purchase these pins in pairs or a case if you are not intending to replace an individual unit.
ProductSiteLaunchDate : 2016-05-20T19:28:29.667Z
Size : One Size
Style : 18-8 Stainless Steel
UnitCount : 50
UnspscCode : 31161700