Cart 2 india

Specification
Brand : S-D-S Screws
BulletPoint1 : A Flange Nut Lock That Has A Wide Flange At One End That Acts As An Integrated Treatment
BulletPoint2 : This Nut Assortments For Stainless Steel Bolts Nuts And Washers Locknut
BulletPoint3 : Stainless Steel Flange Lock Nut Hexnut Large Hardware
BulletPoint4 : Stainless Steel Bolts And Nuts
BulletPoint5 : Width - Flat to Flat : 1/2" Height / Thickness : 0.281"
Color : Black
DriveSystem : External Hex
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier1 : 0653829563920
ExternallyAssignedProductIdentifier2 : 653829563920
FinishType : Unfinished
GradeRating : class 10
ItemName : T Nuts Flange Nut Assortment T Nut Hex Nuts Stainless Steel Washers Lock Nuts Hex Nut Stainless Steel Lock Locking Nut Stainless Steel Flange Serrated 5/16-24 (10 Pcs) Super-Deals-Shop
ItemPackageQuantity : 10
ItemTypeKeyword : flange-nuts
Manufacturer : Imported
Material : Stainless Steel
MeasurementSystem : Inch
MetalType : Stainless Steel
NumberOfItems : 25
PartNumber : PM33407-25
ProductDescription : Drive Style : Socket

Drive Size : 1/2"

Thread Size : 5/16-24

Material : Stainless Steel 304

Quantity of Fasteners in Package : 10

Width - Flat to Flat : 1/2"

Height / Thickness : 0.281"

Width - Point to Point : 0.577"

Threads Per Inch (TPI) : 24

Flange Diameter : 0.672"

Coarse or Fine Thread : Fine

Thread Direction : Right Hand

Lock nut is a round nut, and in its outer open four small slot, you can use the crescent wrench screw on the stud, the lock nut should be equipped with a shaft washer, it can be used to make the small groove on the stud and its peripheral groove relative to the fixed, to prevent its loose

Bolt thread on the nuts embedded in the extrusion, making the deformation, after installation, and thread completely squeeze contact, the extruded to the bolt a lot of resilience, increased friction, so that the bolt is not easy to loose

Lock nuts for stainless steel bolts are highly resistant against turning, preventing the lock nuts from weakening and loosening under vibration and torque which reduces the strength of hold

Made with industrial-strength material capable enough to replace lock washers and prevent bolts from being exposed and coming out providing better security and firm hold

If you are experiencing galling, slow down installation speed, wait for heat to disperse, and apply a lubricant

It is used as a type of locknut, where it is "jammed" up against a standard nut to lock the two in place

Lock nuts generate a large amount of friction and heat during installation

Performs better compared to lock washers as it is made out of non-corrosive material

It is also used in situations where a standardnut would not fit

A jam nut is a high profile type of nut


ProductSiteLaunchDate : 2017-10-10T07:00:00.000Z
Size : 5/16-24
UnspscCode : 31161700