Cart 2 india

Specification
Brand : JUWO
BulletPoint1 : 3/8" male flare on one end and 1/2" female NPT on the other.
BulletPoint2 : Suitable for propane, gas, fuel equipment, plumbing, refrigeration and more.
BulletPoint3 : Compatible with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
BulletPoint4 : Constructed from brass with high-temperature ductility and low magnetic permeability.
BulletPoint5 : Contain low lead and prohibited to install for potable water use in the USA by federal law.
Color : Brass
ConnectorType1 : Flare
ConnectorType2 : Elbow
ControlMethod : touch
ExteriorFinish : Brass
ItemName : JUWO 3/8" Male Flare x 1/2" NPT Female Brass Tube Fitting for Propane, Gas, Fuel, 90 Degree Elbow (1-Pack)
ItemPackageDimensions_Height : 6.5024 centimeters
ItemPackageDimensions_Length : 2.3114 centimeters
ItemPackageDimensions_Width : 5.3086 centimeters
ItemPackageQuantity : 1
ItemShape : 90 Degree Eblow
ItemTypeKeyword : flared-tube-fittings
Manufacturer : JUWO
Material : Brass
ModelName : Flare
ModelNumber : EB90MFN004
NumberOfItems : 1
NumberOfPieces : 1
Pattern : Brass
ProductDescription :

JUWO 90-Degree Elbow Fitting is designed for fuel equipment, plumbing, gas, refrigeration, and vacuum applications, and is suitable for copper, brass, aluminum, and steel tubing.

This 90-degree elbow fitting features one end with a 45-degree flare connection and the other end with an NPT female connection, providing an effective liquid transfer even at the 90-degree angle.

Specifications

Size: 3/8" Male Flare x 1/2" Female NPT

Connector Type: Flare, Elbow

Material: Brass

Features: Flare Fitting, Threaded Screw

Durability: Rust Resistant, Leak Resistant

Applicable Media: Propane, LP Gas, Natural Gas, Fuel

Applicable Pipe: Brass, Copper, Aluminium, Steel Tubes

Application: Plumbing, Refrigeration, Vacuum, Pneumatic and Hydraulic Systems

Temperature Range: -65°F to +250°F (-53°C to +121°C)

Quantity: 1 Pack

Exterior Finish: Brass

Warm Tips

1. These fittings contain low lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

2. When installing, don't over-tighten the fitting to avoid damage.

3. Soap test is recommended to ensure that it is installed in place without leakage.

ProductSiteLaunchDate : 2023-02-15T00:00:00.000Z
Size : 3/8" Male Flare x 1/2" Female NPT
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700