Cart 2 india

Specification
Brand : Flex-Hone
BulletPoint1 : [QUALITY]- Proudly Made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options.
BulletPoint2 : [BENEFITS]- The FLEX-HONE for Chamfer Blending blends and radiuses sharp edges and removes microburrs on chamfered holes eliminating stress risers caused by the chamfering operation.
BulletPoint3 : [STYLE]- Designed for 0.031"-0.050" Chamfer Size Range.
BulletPoint4 : [MATERIALS]- Suitable for mild steel, stainless steel, cast iron and other softer ferrous materials.
CompatibleMaterial1 : Mild Steel
CompatibleMaterial2 : Stainless Steel
CompatibleMaterial3 : Cast Iron
CompatibleMaterial4 : Stainless Steel
ExternallyAssignedProductIdentifier1 : 843469140333
ExternallyAssignedProductIdentifier2 : 0843469140333
IncludedComponents : CH-C 14MM LARGE CHAMFER FLEX-HONE 180SC
ItemDisplayDimensions_Height : 2 inches
ItemDisplayDimensions_Length : 9.3 inches
ItemDisplayDimensions_Width : 3.9 inches
ItemName : Brush Research CH-C Large Chamfer Flex-Hone, Silicon Carbide, 14mm Diameter, 180 Grit (Pack of 1)
ItemPackageDimensions_Height : 28.9 centimeters
ItemPackageDimensions_Length : 4.2 centimeters
ItemPackageDimensions_Width : 8.6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : flex-hones
Manufacturer : Brush Research Manufacturing
Material : Silicon Carbide
ModelName : FLEX-HONE for Chamfers
ModelNumber : CHC14M18
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : CHC14M18
ProductDescription :

Features and Benefits:

For any type and size of cylinder the FLEX-HONE process (Superfinishing) produces a controlled surface condition unobtainable by any other method. It involves finish, geometry and metallurgical structure. A high percentage plateau free of cut, torn and folded metal (with radiused ports).

A resilient, flexible, honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering, self-centering to the bore, and self-compensating for wear. Specifically, it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented, amorphous or smeared metal from previous operations. It is accomplished at a low pressure where the "stones" float. See and read the various booklets of actual tests covering almost every situation that will ensure a superior performance in situations depending on surface finish. The particular type of Flex-Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys for oil retention as opposed to the often unidirectional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the Flex-Hone.

ProductSiteLaunchDate : 2013-06-15T08:00:01.000Z
Size : cm
Style : 180 Grit
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 47131600