Cart 2 india

Specification
Brand : Rygcrud
BulletPoint1 : Modified asphalt plus sbs glue, 2.5mm thickness, 10m/roll. Easy to work with. Compared with traditional asphalt filler tape, no heating equipments is needed. Easy operation and fast construction speed
BulletPoint2 : Crack & Joint Repair This crack repair tape have film in both sides. For easy operation, you can tear off the film any side for construction.
BulletPoint3 : Clean the cracks, tear off the film in the side of the repair tape, Installation requires to placed in the crack line, stick it in the place where it needs to be repaired, and flatten it and it hammered into place.
BulletPoint4 : This product is easy to install without the want of applying heat. A permanent bond in any cement pavement and asphalt pavement pavement surface. Safe, no side effects in construction personnel
BulletPoint5 : Asphalt concrete crack filler is mainly used for the construction and maintenance of high-grade highways, general highways and urban road pavement base layers. This product is not suitable for crossroads, downhill positions in mesh cracking, heavy-load Road and downhill position
Color : Black-2roll
ExternallyAssignedProductIdentifier : 8900641939740
ItemName : Rygcrud Asphalt Tape for Joints, Asphalt Tarmac Parking Lot Crack Sealer, Self-Adhesive Repair Filler, 2.5mm Thick, No Torch Required(Black-2roll,4cm*10m)
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 81 centimeters
ItemPackageDimensions_Width : 22 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : pond-liners
Manufacturer : guo rui
ModelName : 199753
ModelNumber : 199753
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 199753
PowerSourceType : AC
ProductDescription : My recommendation is to place in in your pavement cracks so that hot weather will let it do it's thing. Installation requires to placed in the crack line and it hammered into place.

Asphalt Crack Filler
Material: Modified asphalt + sbs glue
Color: Black
Thick: 2.5mm
Size: 10m/roll
Width: 3/5/10 cm

Features:
This product is easy to install without the want of applying heat.
The construction speed is fast, which is several times that of grouting.
The use of seam tape in the seam of the road surface can keep it from being deformed.
The top side has fiberglass or something similar. The good thing about the top side is that it prevents it from tacking out when driving over it.
If you encounter irregular cracks, you can cut the tape with scissors and paste according to the direction of the crack. At the joint of the seam tape, it should be closely pasted and aligned.

Install Way:
1. Blow and clean the cracks (no big bumps, loose sags, gravel or oil stains). If there are large pits and gnawing edges, it must be filled with quartz sand or asphalt cold-fill sand.
2. Peel off the isolation film in the back of the seam tape, with the non-tearable film facing up, and stick the seam tape flatly in the road with the crack as the center line.
3. If you encounter irregular cracks, you can cut the tape with scissors and paste according to the direction of the crack. At the joint of the seam tape, it should be closely pasted and aligned.
4. After the seam tape is glued, use a hammer or iron roller to roll it firmly to make it tightly adhere to the ground. Be careful not to press the air between the seam tape and the road surface to form bubbles.

Package includes:
1 x asphalt tape

NOTE:
The construction activity should not be carried out within 24 hours before and after rain.
When the road surface temperature is lower than 15C, it is recommended to use a hot torch to bake
ProductSiteLaunchDate : 2024-07-31T11:00:55.478Z
Size : 4cm*10m
UnitCount : 1
UnspscCode : 31201500