Cart 2 india

Specification
Brand : Yundxi
BulletPoint1 : Automatic: Without electricity, easy to use, long service life, low failure rate, saving water resources.Supply automatically and stop water according to the water level change.
BulletPoint2 : Easy to install: Small size, estimated flow rate up to 40 psi 3 gallons per minute, 60 psi 5 gallons per minute.
BulletPoint3 : Material: Made of high quality plastic material that will not rust, long life,small volume, suitable to replace old float valves.
BulletPoint4 : Widely used in: Water tanks, water towers, swimming pools, solar energy, toilets, hot water boilers, animal drinking water, air cooling, humidifiers, civil buildings, cooling towers, hot water boilers, steamers, water tanks, water towers, toilets.
BulletPoint5 : Service Attitude: We do our best to provide you with the best quality products and the best shopping experience, if you are not copletely satisfied, please feel free to contact us to communicate
Color : Side Inlet External Installation
Department : unisex-adult
ExteriorFinish : Abs,Plastic
ExternallyAssignedProductIdentifier : 6031067795589
GpsrSafetyAttestation : 1
IncludedComponents : no
ItemName : Yundxi 1/2" Automatic Float Valve Water Level Control Valve, Used in Swimming Pools, Livestock Tanks, aquaculture, Aquariums (Side Inlet External Installation)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-float-valves
Manufacturer : Yundxi
Material : Brass
Material1 : Plastic
Material2 : Nylon
MaximumOperatingPressure : 980 kilopascal
ModelName : Automatic float valve water level control
ModelNumber : 1
NumberOfItems : 1
NumberOfPorts : 1
PackageLevel : unit
PartNumber : US1-20221215-021
ProductDescription : Automatic float valve water level control valve

• Working pressure range: 1-10KG (0.1-1MPa)
• Applicable medium: clean water
• Applicable medium temperature: ≤70 °
• High temperature medium temperature: 10 ° ~ 70 °
• Type: Vertical internal installation
• Material: nylon + rubber
• Outlet diameter: 1/2 inch BSP thread
• Color: as shown
• Working principle: When the surface of the water tower or the pool drops, the float in the valve chamber sinks. Use the hole rod to open the pilot hole of the control valve. Ascend, press the joystick to close the pilot hole, the valve cavity begins to fill with water, and then close the control valve. The sealing surface of the control valve immediately stops the water supply.

Package Contents:

• 1 water level control valve

Only the above packaging content, other products are not included.

Note:

• This product is a liquid level control valve.
• After installation, the float must be vertical. If you need to install from the top, you need an elbow to connect the float valve and the inlet line. First, fix the water inlet pipeline on a horizontal surface, and then connect the automatic water level control valve to the water inlet according to the standard.
• The main water inlet should be aligned with the normal diameter of the control valve.
• When in use, the shut-off valve should be fully opened.
• If two valves are installed in the same tank, they should be kept in the same level.
• Before installation, please clean the impurities in the pipeline to prevent blockage.
• If the water quality is not good, the valve needs to be properly maintained.
• If the user finds that the time for adding water becomes longer, he can upload the water inlet and rinse

ProductSiteLaunchDate : 2022-12-15T07:43:45.761Z
Size : DN20
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
ValveType : Float Valve