Cart 2 india

Specification
Brand : LeTkingok
BulletPoint1 : The all metal jack model adopts a stainless steel cylinder body
BulletPoint2 : An aluminum alloy base shell, external simulation
BulletPoint3 : Precise structure, two-stage piston rods, and a conservative lifting force of 15 kilograms.
BulletPoint4 : Enhanced Safety: Car jack pad adapter the grooved magnetic jack pad adapter provides additional stability and secure support when lifting vehicles, enhances the safety of lifting operations
BulletPoint5 : User Friendly: Magnetic jack pad its simple yet efficient design makes it an easy to use accessory. Whether you are a seasoned mechanic or a car owner carrying out a repair job, our jack adapter simplifies jacking operations
BulletPoint6 : 【Easy to Use】Both ends of the sink support bar can be retracted or extended at the same time to achieve the desired height adjustment. After pressing down the cabinet, turn the center screw clockwise or counterclockwise, the end of the positive lead.
BulletPoint7 : 【2 Sockets】One head comes with two jacks, one is center jack mainly for flat rock slab surface and the other is eccentric jack mainly for ceramic one-piece basin with waterproof strip.
Color : blue
CompatibilityOptions : Most pinch weld that is at least 3 inches
CompatibleWithVehicleType : Cabinet
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : Truck
ExternallyAssignedProductIdentifier : 5419228797480
IncludedComponents : No
ItemName : Mini Hydraulic Jack, Model 1/10 Hand Cranked Vertical Jack Max Load 15KG JDM-163
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : floor-jacks
LoadCapacity : 440 Pounds
Manufacturer : LeTkingok
Material : Stainless Steel+Aluminum Alloy
ModelName : Niiyenh2om6v8wy0
ModelNumber : Niiyenh2om6v8wy0
NumberOfItems : 1
PartNumber : T-1962
ProductDescription : Mini Hydraulic Jack, Model 1/10 Hand Cranked Vertical Jack Max Load 15KG JDM-163

Description:
The all metal jack model adopts a stainless steel cylinder body, an aluminum alloy base shell, external simulation, precise structure, two-stage piston rods, and a conservative lifting force of 15 kilograms.

Specification:
Product Name: Mini Hydraulic Jack Model
Product Material: Stainless Steel+Aluminum Alloy
Model scale: 1/10
Maximum load capacity: 15KG
Weight: About 65G

How to use it:
When the player receives the product, the jack is at the highest lifting position. At this point, they pull out the joystick and use the joystick head to rotate the pressure relief valve counterclockwise for one and a half turns.
Slowly lower the piston rod to the bottom, and then rotate the pressure relief valve clockwise for one and a half turns. Insert the joystick into the push button and shake it up and down.
The jack is ready to work. (When using it for the first time, please slowly press the piston rod and shake the joystick. If the speed is too fast, the hydraulic oil and air in the cylinder will produce bubbles.
After raising the hydraulic oil level, a small amount of hydraulic oil will be discharged from the exhaust hole. This is a normal phenomenon and will be eliminated after multiple cycles of operation.)
Usage precautions:
Vertical jacks can only be used vertically and cannot be used horizontally or upside down.
When the jack shakes the joystick, it cannot make the piston rod hit the top. Use a syringe to supplement hydraulic oil to the oil injection port. When placing the jack, please be at the highest lifting position.
If the piston rod is in the retracted state, the jack cannot be placed horizontally or upside down. Otherwise, hydraulic oil will flow out from the oil injection and exhaust holes.

Package included:
1 x Mini Hydraulic Jack
ProductSiteLaunchDate : 2024-09-20T03:33:22.406Z
Size : 125mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : Manufacturer warranty for 90 day