Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : PMD Products
BulletPoint : 1 EACH
BulletPoint1 : Hand Free Nailing of Hardwood Flooring. Can be used with any floor thickness
BulletPoint10 : Meets or exceeds ANSI standards
BulletPoint11 : Ductile iron ratchet bar with 10 height settings
BulletPoint12 : Heavy duty stamped steel frame with fully welded seams
BulletPoint13 : Strong construction makes for a durable lift
BulletPoint14 : Lifting range: 10-3/8 inch to 16 inch
BulletPoint15 : Meets or exceeds ANSI standards
BulletPoint2 : Now with FELT protected bottom and end surfaces to avoid damage the flooring for Carefree installation of hardwood floors
BulletPoint3 : Always have straight floorboards by bringing crooked planks into place for nailing
BulletPoint4 : Steel Jack, Hardened Dual Gear mechanism, spring loaded ratchet mechanism for locking
BulletPoint5 : Can be used as push or pull designed to push or pull flooring strips into place
BulletPoint6 : Ductile iron ratchet bar with 10 height settings
BulletPoint7 : Heavy duty stamped steel frame with fully welded seams
BulletPoint8 : Strong construction makes for a durable lift
BulletPoint9 : Lifting range: 10-3/8 inch to 16 inch
Color : Blue
Color1 : black
Color2 : Black
CompatibleWithVehicleType : Car
ExternallyAssignedProductIdentifier1 : 197988846598
ExternallyAssignedProductIdentifier2 : 197988625537
ExternallyAssignedProductIdentifier3 : 0197988846598
ExternallyAssignedProductIdentifier4 : 0197988625537
ExternallyAssignedProductIdentifier5 : 00197988625537
GpsrSafetyAttestation : 1
IncludedComponents : No mirror
IsAssemblyRequired : 1
ItemName : PMD Products Padded Flooring Jack for Installing, Straightening Laminate or Hardwood Wood Tile Floor Boards
ItemPackageDimensions_Height : 36.6014 centimeters
ItemPackageDimensions_Length : 8.1026 centimeters
ItemPackageDimensions_Width : 14.3002 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : floor-jacks
LoadCapacity : 6 pounds
Manufacturer : PMD Products
Material : Alloy Steel
MinimumHeight : 5 inches
ModelName : Air Jack 3 Tons
ModelNumber : 98787
NumberOfItems : 1
PackageLevel : unit
PartNumber : 98787
ProductDescription : Steel Jack, Hardened Gears, spring loaded ratchet mechanism Easy to use ratcheting mechanism (ratchet downward to force, push lever utmost forward to release gear drive mechanism) Can be used as push or pull designed to push or pull flooring strips into place and hold them tightly for hands-free nailing. Operation Instructions: The jack sits on top of your flooring and gains leverage against a wall or a wall-stud. Use the lever handle to ratchet the faceplate against a stationary surface. When a stud location cannot found, a board long enough to span the distance of the studs can be used to ress against and keep you from breaking through the drywall. Continue to ratchet until the tool floor catch draws the flooring to the desired position. The jack can be left in place while you nail down the flooring strip. To release the jack, simply push the handle to full forward position and pull the jack base. When not near a wall or cabinet, the jack can be used mid-floor by screwing a scrap board to the sub-floor and using the jack at that location Under the toe kick of a cabinet, the jack can be used to tighten boards and hold them in place for hands-free nailing. Rack dimensions: 12-5/8" L X 1" W x 5/8" T Rack plate dimensions: 1-7/8" L x 4-5/8" W x 1-1/2" H Lifting plate dimensions: 2" W x 9-1/16: H x 1/4" T Gear diameter: 1" Gear shaft bolt thread: 3/8" x 24 NPT 14 teeth
Size : 3T
Style : Flooring Jack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : 2 year manufacturer