Cart 2 india

Specification
Brand : Scientific Americas
BulletPoint1 : Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface.
BulletPoint2 : Construction: Heat fused vinyl composite,Thickness: 0.125" (3.2mm) , Hardness: 45 Shore “A”, per ASTM-D412
BulletPoint3 : Tensile Strength: Greater than 300 PSI, per ASTM-D412, Tear Strength: Greater than 80 lbs/inch, per ASTM-D624
BulletPoint4 : Abrasion Resistance: Greater than 750 cycles, per Tabor-CS17 , Heat Resistance: -20°F to 140°F continuous
BulletPoint5 : Resistance to degradation by inorganic acids, organic acids, reducing agents, Aliphatic hydrocarbons, mineral oil, aldehydes, and amines
CareInstructions : Shake and Sweep Clean or Vacuum Clean
Color : Blue
ExternallyAssignedProductIdentifier1 : 0674023714574
ExternallyAssignedProductIdentifier2 : 674023714574
ExternallyAssignedProductIdentifier3 : 00652671759703
FdaDeviceClassification : iv
FdaIndicationOfUse : otc_and_rx
FdaInstructionsForUseType : consumer
FdaLabelType : consumer
ItemName : ESD Mat with a Grounding Cord, Three Layer Vinyl, 36" X 72" (3' Wide x 6' Long x 0.125" Thick), Blue
ItemPackageDimensions_Height : 46.99 centimeters
ItemPackageDimensions_Length : 0.762 centimeters
ItemPackageDimensions_Width : 45.72 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : floor-mats-and-matting
Manufacturer : Scientific Americas
Material : Vinyl
ModelName : Checkered Anti Fatigue Mat
ModelNumber : 29023
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 2080-36X72B
Pattern : Solid
PileHeight : Low Pile
ProductDescription : 36" X 72'' Vinyl Mat. Feature a three layer design, 0.125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide. It is compatible for use with continuous monitors. Meets the ESD work surface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. The top layer is made of durable vinyl and it is suited for use as an ESD protective bench mat or tray mat. Its highly conductive Carbon middle layer provides a Quick discharge path to ground. The cushioned dissipative bottom layer provides excellent protection against physical damage. Available in Blue. Grounding: This material must be properly grounded for optimum electrical performance. You may use our Grounding cord Cleaning: Do not use cleaners with silicone. Silicone buildup will create an insulative film on the surface. Low Profile Ground Point has a low profile design and comes with 10mm male or female snaps. They are made from rugged vinyl and come standard with 7’ cords. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. These low profile ground cords attach to ESD Snap sockets that are placed into an ESD Mat.
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2018-05-31T07:00:00.000Z
Size : 36"x 72"
StreetDate : 2018-05-16T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1