Specification Brand : Generic BulletPoint1 : High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid BulletPoint2 : Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts) BulletPoint3 : Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise BulletPoint4 : Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread BulletPoint5 : Enclosure Type: 30° trapezoidal, optimally-vented bass ConnectivityTechnology : Wired ExternallyAssignedProductIdentifier1 : 0840425871607 ExternallyAssignedProductIdentifier2 : 840425871607 IncludedComponents : No ItemName : Bogen 106-0416 Model AFI-4 Contractor Series Loudspeaker with Metric, Black, 300W Cont./1200W Peak Max. Power Handling, 99dB Sensitivity, 8 ohms Nominal Impedance, 58Hz to 20kHz Frequency Response ItemPackageDimensions_Height : 18.7 inches ItemPackageDimensions_Length : 48.03 inches ItemPackageDimensions_Width : 17.3 inches ItemPackageQuantity : 1 ItemTypeKeyword : floorstanding-home-speakers Manufacturer : Bogen ModelName : Contractor Series Loudspeaker ModelNumber : AFI-4 MountingType : Floor Standing NumberOfItems : 1 PartNumber : FOCALNABDL250212-67 ProductDescription : Bogen 106-0416 Model AFI-4 Contractor Series Loudspeaker with Metric, Black, 300W Cont./1200W Peak Max. Power Handling, 99dB Sensitivity, 8 ohms Nominal Impedance, 58Hz to 20kHz Frequency Response
The AFI-4 is a fully arrayable loudspeaker versatile enough for clubs, discos, churches, theaters, and theme parks. Much of this versatility comes from the available options that include a 60° x 45° or 90° x 45° horn as well as bi-amplification capabilities. These horns, as well as their logo plate, are rotatable to allow alternative hanging positions.
KEY FEATURES - Driver Complement: Low-Frequency: One Apogee 12" (305mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters; also treated with Ferrofluid for greater power handling capability, lower distortion, and control of short-term impedance rise - High-Frequency: One Apogee 1.75" (45mm) voice coil, 1" (25mm) exit horn-loaded compression driver treated with Ferrofluid - Input Connectors: Barrier strip, screw type #8 - Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-4/-4B/-4W/- 4WB Modules) or DLC24 - Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts) - Grille: Highly durable, quality finish on perforated steel - Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread - Finish: Textured high-strength black epoxy paint; other colors optional - Enclosure Type: 30° trapezoidal, optimally-vented bass - Cabinet Construction: Multi-ply hardwood
SPECIFICATIONS - Format: Passive/Two-way - Dispersion: H: 60° x V: 45° (rotatable) - Frequency Response (1m on axis): 58 Hz to 20 kHz ± 3 dB - Max. SPL (@1m): 124 dB cont./130 dB peak - PTML (peak transient mechanical limit): 138 dB - Sensitivity (1W @ 1m): 99 dB SPL/100Hz to 4kHz - Nominal Impedance: 8 ohms, each driver - Max. Power Handling: 300W cont./1200W peak - Dimensions: Front 15.3"W x 28.2"H, Rear 9.9"W x 28.2"H, Depth 12.1" - Weight: 53 lb