Cart 2 india

Specification
Brand : Respicefinem
BulletPoint1 : Accurate Water Monitoring: The sensor measures from 1 to 30 liters per minute, making it ideal for precise fluid control systems in industrial, residential or agricultural applications
BulletPoint2 : Robust Build for Multiple Installations: The sensor can withstand water pressure up to 1.75MPa and features a standard G1/2 (DN15) pipe thread that fits pipes with an outside diameter of approximately 2cm for easy integration
BulletPoint3 : Reliable Signal Output: The sensor produces a clear square output that is seamlessly compatible with control systems and PLCs, simplifying data interpretation and automation processes
BulletPoint4 : Compact & User-Friendly Design: Measuring only 6.13.4 cm (2.41.3 inches), the sensor ensures use in tight spaces while maintaining a high level of functionality. Color-coded leads for easy wiring: red (input +), yellow (output) and black (ground -)
BulletPoint5 : Operation Guidelines: The sensor is designed to withstand daily use but needs to be protected from severe impact, and water temperatures in excess of 120° Celsius. Ensure that the direction of water matches the sensor arrow for accurate readings
ExternallyAssignedProductIdentifier : 7639710775903
ItemName : Respicefinem Water Sensor High Precision Hall Effect Flowmeter 1-30L min Lightweight for Accurate Measurement Home Use
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemTypeKeyword : electronic-component-flow-sensors
Manufacturer : Respicefinem
ModelNumber : Respicefinem6vkw8z1ggb
NumberOfItems : 1
PartNumber : Respicefinem6vkw8z1ggb
ProductDescription : Description:
Water sensor is mainly composed of plastic valve, water rotor subassembly and hall sensor.It is mounted on water heater inlet and used to meter water . When water goes through rotor subassembly, magnetic rotor rotates and rotating speed changes with the . Hall sensor outputs corresponding pulse signal as feedback to controller and controller judges water amount and adjusts .

Features:
This sensor meter is lightweight, small and easy to install.
The internal impeller has stainless steel shaft which is quite wear-resistant.
Seal ring uses mechanical structure that stressed from up and down directions and will not leak.
The sensor has high quality Hall effect element and is encapsulated with glue, preventing from water entering.
It is a great sensor of high precision, long service life and stable performance.

Specifications:
Working Range: 1~30L/min
Water Pressure: 1.75MPa
Pipe Thread: G1/2 (DN15)
Thread Outer Diameter: Approx. 2cm
Output Waveform: Square
Size: 6.1*3.4cm/2.4*1.3in

Wiring:
Red: IN+
Yellow: OUT (signal output)
Black: GND-

Note:
1, Forbidden to severe impact and chemical erosion.
2, Forbidden to throw or collision.
3, Water detection should be same as the arrow on sensor.
4, Water temperature should not be more than 120℃.

Package Includes:
1 x Sensor




ProductSiteLaunchDate : 2024-08-12T04:48:14.115Z
UnitCount : 1