Cart 2 india

Specification
Brand : WYDDDARY
BulletPoint1 : 【Accurate Testing】Accurately measure Melt Mass Flow Rate (MFR) for various plastics with GB3682-2000 standards.
BulletPoint2 : 【Precision Control】Features a temperature range from room temperature to -400℃ with 0.1℃ control resolution and 0.1S timing resolution for precise testing conditions. Quickly(≦4min) restore the constant temperature state after filling.
BulletPoint3 : 【Intuitive Digital Control】Equipped with an touch screen display for clear visualization of time and temperature settings, allowing easy input of test loads and weights for automatic calculation and printing of results.
BulletPoint4 : 【Customizable Settings】Manual/Auto Cut Options, Adjustable Interval & Time for User-Friendly Experience.
BulletPoint5 : 【Versatile Materials】Suitable for PE, TPE, PC, ABS, & More, Including High-Temp Polymers like Polycarbonate.
ExternallyAssignedProductIdentifier1 : 0840403712533
ExternallyAssignedProductIdentifier2 : 840403712533
IncludedComponents : Melt Flow Rate Tester*1
ItemName : WYDDDARY Automatic Melt Flow Index Rate Tester MFR Tester Indexer Flow Rate Meter with Touch Screen Display and Printer for Polymer Plastic 110V 450W
ItemPackageDimensions_Height : 25.59 inches
ItemPackageDimensions_Length : 19.69 inches
ItemPackageDimensions_Width : 14.96 inches
ItemPackageQuantity : 1
ItemTypeKeyword : multi-testers
Manufacturer : WYDDDARY
MeasurementAccuracy : 0.1
ModelNumber : 3290-383
NumberOfItems : 1
PartNumber : CD025374
ProductDescription :

Description:

The melt flow rate meter is an instrument for measuring the flow performance of plastic polymers at high temperature according to the test method of GB3682-2000. It is used for measuring the melt flow rate of polyethylene, polypropylene, polyformaldehyde, ABS resin, polycarbonate, nylon fluoroplastics and other polymers at high temperature. It is applicable to the production and research of factories, enterprises and scientific research institutions.

Specification:

Test method: Quality method (MFR) with printing function

Temperature range: normal temperature -400℃

Display mode: touch screen display

Temperature control accuracy: ±0.1℃

Timing accuracy: 0.1S

Load: can be composed: 1.2kg; 2.16kg; 3.8kg; 5kg; 7.16kg; 10kg

Cutting method: automatic and manual

Inner diameter of material barrel: 9.550mm±0.025mm

Barrel length: 160mm

Mould: the material is tungsten carbide

Length: 8.000mm±0.025mm

Inner diameter: 2.095mm±0.005mm

Power: 450W

Matters needing attention:

1. The single power socket must have a ground wire hole and be reliably grounded.

2. In case of abnormal display on the LCD, shut down the machine first, then restart the machine, reset the test temperature, and start the operation.

3. In normal operation, if the furnace temperature is greater than 450 ℃, the software will protect, interrupt the heating and send an alarm.

4. In case of any abnormal phenomenon, such as temperature control and display failure, shut down the machine for maintenance,

5. When cleaning the piston rod, do not scrape it with hard objects.

ProductSiteLaunchDate : 2024-07-26T07:10:43.601Z
StreetDate : 2017-05-15T00:00:01Z
UnitCount : 1
Wattage : 450 watts