Cart 2 india

Specification
Brand : pinkhatcat
BulletPoint1 : Red crankshaft Holder Tool for 3/4" cranks
BulletPoint2 : No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
BulletPoint3 : Simply slide this tool onto the crank, insert key and the proper size bolt through the 3/8" square hole and into the sidecover. This will lock the crank. The 3/8" square hole allows you to use a ratchet or breaker bar to hold the crank for engines without the threaded holes in the sidecover.
BulletPoint4 : Made from heavy 304 stainless steel with an aluminium hub. Assembly required. The product in the package is shown as the picture
BulletPoint5 : The 3/4" hub can also be changed out for a 5/8" hub to hold 5/8" cranks or jackshafts
BulletPoint6 : Please use screws to fix the square holes on the box, it is better not to use a ratchet.
Color : Red
ControllerType : Ring
ExternallyAssignedProductIdentifier : 8719883762272
ExternallyAssignedProductIdentifier1 : 0741792331629
ExternallyAssignedProductIdentifier2 : 741792331629
FinishType : Polished
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : 1
ItemName : pinkhatcat 3/4" Crankshaft Holder Tool for 3/4" Cranks Aluminium Red
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : automotive-flywheel-tools
Manufacturer : pinkhatcat
Material : Aluminum Alloy
ModelName : 3/4" Crankshaft Holder Tool
ModelNumber : AMLY-MK0581
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces1 : 9
NumberOfPieces2 : 1
OemEquivalentPartNumber1 : 88800014
OemEquivalentPartNumber2 : 88840317
PackageLevel : unit
PartNumber : AMLY-MK0581
ProductDescription : Red crankshaft Holder Tool for 3/4" cranks
No more struggling to hold the crank when torqueing a flywheel! This tool slides over any 3/4" keyed crank and allows the flywheel to be torqued properly.
Simply slide this tool onto the crank, insert key and the proper size bolt through the 3/8" square hole and into the sidecover. This will lock the crank. The 3/8" square hole allows you to use a ratchet or breaker bar to hold the crank for engines without the threaded holes in the sidecover.
Made from heavy 304 stainless steel with an aluminium hub. Assembly required. The product in the package is shown as the picture
The 3/4" hub can also be changed out for a 5/8" hub to hold 5/8" cranks or jackshafts
ProductSiteLaunchDate : 2019-06-12T18:09:53.733Z
RecommendedUsesForProduct : Sicherheit
Size : normal
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : 1 Year Warranty