Cart 2 india

Specification
Brand : Yoursme
BulletPoint : 1PCS Automotive Camshaft Bushing Sleeve Tool 1/2 "Dr 22mm 16PT B38 B48 B58 Engine
BulletPoint1 : Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.
BulletPoint2 : Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
BulletPoint3 : Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
BulletPoint4 : Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
BulletPoint5 : 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle.
BulletPoint6 : Long neck designed to reach into confined area of the seal to grip it for removal.
Color : One Color
ExternallyAssignedProductIdentifier : 7427127150662
FitType : Universal
ItemName : Yoursme 22100 Flywheel Locking Tool for 6.6L Duramax with 36mm 3/4'' Socket
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 5.7 centimeters
ItemPackageDimensions_Width : 5.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-flywheel-tools
Manufacturer : Yoursme
Material : Steel
ModelName : 2349
ModelNumber : 22100
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber1 : 529035748
OemEquivalentPartNumber2 : 529036034
PartNumber : 22100
ProductDescription :
FEATURES
1. This tool is used to allow precise positioning of the crankshaft for timing purposes.
2. Used to bar the engine over for service procedures
3. Installs to engage the flywheel teeth and rotate the engine using standard square drive hand tools.

Engine Barring Tool Installation
1. Remove the two bolts holding the inspection cover to the flywheel housing.
2. Remove the pin (not included) from the engine barring tool (J–46392) .
3. Install the tool in the flywheel housing and secure with two bolts of sufficient length.
Note: The inspection cover bolts are not long enough to install the engine barring tool. Longer ones will be needed.
4. As needed, insert the pin (not included) to lock the tool and block movement of the flywheel ring gear.

Remove the engine barring tool (J–46392) as follows:‪
NOTICE: The engine barring tool must be removed from the timing case before starting the engine. Failure to do so could damage the flywheel ring gear.‪
1. Remove the two bolts and the barring tool from the flywheel housing. It is not necessary to remove the pin (not included) .
2. Install the inspection cover on the flywheel housing with the two bolts. Tighten the bolts 25 N·m (18 lb·ft)-MBE 4000 for example.

Package Included:
1 J-46392 Engine Barring Tool Alt.

We committed to providing you a more wonderful service concept. Thanks for your click!
Go Click the BUY NOW Button and Get This Awesome Tool now!
ProductSiteLaunchDate : 2016-09-29T14:12:29.001Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27111700
WarrantyDescription : No Warranty