Cart 2 india

Specification
Brand : USASEALING
BulletPoint : Flame-resistant structural grating contains a fire-retardant isophthalic polyester resin that
BulletPoint1 : Shape: Tube; Cell Type: Closed Cell; Material: EPDM
BulletPoint2 : Grade: Standard; Firmness: Soft (5 - 8 psi)
BulletPoint3 : Length: 10 ft.; ID: 1/4" OD: 3/4" Thickness: 1/4"
BulletPoint4 : Color: Black ; Texture: Smooth; Compression Deflection at 25%: 7 psi; Density: 14 lbs / cu. ft.
BulletPoint5 : Tensile Strength: 85 psi; Temperature Range: -40° to 225° F; Specifications Met: ASTM D1056 2A2
Color : Black
ExternallyAssignedProductIdentifier : 00855833008262
ExternallyAssignedProductIdentifier1 : 193005041175
ExternallyAssignedProductIdentifier2 : 0193005041175
GradeRating : Abc
Hazmat1 : FIRE EXTINGUISHERS
Hazmat10 : FR_SmallGasCartridges
Hazmat11 : GB_SmallGasCartridges
Hazmat12 : IE_SmallGasCartridges
Hazmat13 : IN_GroundOnly
Hazmat14 : IT_SmallGasCartridges
Hazmat15 : JP_GroundOnly
Hazmat16 : NL_SmallGasCartridges
Hazmat17 : PL_SmallGasCartridges
Hazmat18 : SA_SmallGasCartridges
Hazmat19 : SE_SmallGasCartridges
Hazmat2 : UN1044
Hazmat20 : SG_SmallGasCartridges
Hazmat21 : TR_SmallGasCartridges
Hazmat22 : US_ORMD
Hazmat23 : ZA_SmallGasCartridges
Hazmat3 : 2.2
Hazmat4 : AE_SmallGasCartridges
Hazmat5 : BE_SmallGasCartridges
Hazmat6 : BR_SmallGasCartridges
Hazmat7 : DE_SmallGasCartridges
Hazmat8 : EG_SmallGasCartridges
Hazmat9 : ES_SmallGasCartridges
ItemForm : Gel
ItemName : USA Sealing ZUSA-CESR-238 Weather Resistant EPDM Foam Strip with Acrylic Adhesive, 3/4" Thick, 2" Wide, 10 ft. Long
ItemPackageDimensions_Height : 15 inches
ItemPackageDimensions_Length : 0.8 inches
ItemPackageDimensions_Width : 15 inches
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : foam-raw-materials
Manufacturer : USA Sealing
Material : Epdm,Foam
Material1 : Metal
Material2 : Plastic
ModelNumber : wwcc1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ZUSAESR-T-1
ProductDescription : This product is cutting edge technology and is 100% solids. That means that there are no fillers in the formula. Only active raw materials to prevent corrosion. Creep N’ Crawl is absolutely the newest technology in enclosed area cavity and undercarriage protection. It’s delayed drying formulation (168 hours) allows it to creep and migrate into every possible area before turning into a flexible wax film. Most applications are “dry to the touch” in 72 hours. Unlike solvent-based highly flammable products, Creep N' Crawl has a proprietary "very slow cure" formulation which allows it to migrate fully before curing. With no solvents, the corrosion inhibiting agents are allowed to dry naturally for better bonding. When you “force” corrosion inhibitors to dry with solvents you will get lifting and peeling wherever there is an angle or seem in the metal. This is not the case with Creep N’ Crawl. Creep N' Crawl has no solvents or fillers. It is 100% solids which means that every raw material in the formulation is effective as a corrosion inhibitor. It makes the formulation a bit pricey, however, because there are no fillers (solvents, water, etc.) you only need a thin coating, and it goes a long way.. There is nothing to evaporate. so if you spray on 2-3 mil thick, you will be left with exactly what you sprayed on the surface. One coat in the enclosed cavities and you will never need to treat that area again for 5+ years. This compound consists of drying oils and anti-corrosion additives dispersed in a proprietary blend that fully cures in 168 hours (1 week). Dry to the touch in 72 hours. The results are a cured wax-like film that repels water and remains flexible to prevent chipping & cracking. Used in enclosed areas (rockers, doors, etc.) this product will provide protection indefinitely. What does "100% solids" mean ? When a coating is chemically "100% solids", what you pay for is what you’ll end up with. But if the product is only 50% solids, then the other 1/2 is "fillers" (water, solvents, thickeners, etc.) is going to evaporate. Fillers are not a bad thing. They are often needed to hold the cost down. Naturally formulas that have no fillers (100% solids) are more expensive but go much farther in coverage because you are using much less. What you spray wet, is what you are left with dry when using a 100% solids formula. If the coating is any less than 100% solids the thickness of the coating will decrease because any additive (solvent, water, etc.) that is not a solid must evaporate during the drying process.
ProductSiteLaunchDate : 2021-08-14T06:40:39.468Z
RecommendedUsesForProduct : For Paint Protection
Size : 154 Fl Oz (Pack of 1)
SpecificUsesForProduct : Paint Protection
Strands : 7
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31410000
Voltage : 600 volts