Description
The main components of the oil, such as protein and many beneficial micro-elements of the body remain in the remaining material is a defatted nut powder,
Such as peanut and white sesame nuts powder, can be used to make porridge, making cakes, fishing, potted plants, so hot pot soup, do all kinds of cakes, can also be made of skim high protein butter, peanut paste, sesame paste, sesame paste .
Specification:
Material: 304 Food grade stainless steel and German Cutlery Steel
Character: Intelligent Oil Temperature Control
Item Size:45*18*30.5CM/17.7*7.1*30.5inches
Rated Voltage: 110V
Power: 610W
Rated Frequency: 50Hz
Plug: US Plug
Oil Extraction Rate: Up to 45%
Pressing Speed: 5 kg per hour(for peanut)
Oil output:2 kg per hour(for peanut)
Work Time: 24 hour coutinousely
Lifetime: 20 years
Oil Yield: >50% of oil content of the material
Intelligent power saving squeezing an hour of peanut consumption of 0.6-0.8 kwh of electricity
Net Weight: 10.5kg
Gross Weight: 11kg
Package Size: 55*29*37cm
Operation Instructions:
1. Turn On The Power Switch First , The Machine Automatically Enters Preheating State. It Needs To Be Heated For For Ten Minutes At A Temprerature Between 180~220 ℃.
2. After Preheating, Turn On The Motor Switch To Press Oil.
Package:
1 x Oil Press Machine
1 x Stainless Steel Oil Cup
1 x Power Cord
1 x Glove
1 x Hard Cleaning Brush
Notes:
1.You can make virgin olive oil from the seeds of olives, but can't press the flesh or the stones.
2.Nuts are generally ok, pay attention to the need to shell. If they are too big, they need to be chopped into granules.
3.Do not squeeze hard seeds, such as coffee beans, grape seeds, rice, castor seeds, etc. Coconut pulp is also not allowed.
4.Remember that the pressed material must be dry, and no water can be added. If it is refrigerated from the refrigerator or washed, it should be fully dried in the sun. If the material is normal in dryness, it will be squeezed directly. If the material is wet and moist, it is recommended to fry it medium-rare or microwave oven.
5.The machine must be preheated for 8-10 minutes before pressing, and the temperature is set at 160-200 degrees.
6.After pressing the oil, remember to press the reverse key to reverse it for five seconds (i.e., return the material to assist cleaning). After the machine cools down, take down the press chamber and press rod with heat-insulating gloves. The main machine can't be washed with water, just clean the press chamber and press rod with clean water or detergent.