Cart 2 india

Specification
Brand : Dntum
BulletPoint1 : This instrument demonstrates the relationship between the direction of the ampere force and the magnitude of the ampere force and the current intensity, the length of the energized wire, and the intensity of the magnetic line of induction.
BulletPoint2 : The wire frame (conductor) is deflected under the action of ampere force in a uniform magnetic field, and the wire frame is affected by the horizontal component of its own gravity. When the two reach a balance, the plane of the wire frame deflects to a certain angle to stand still (The greater the angle, the greater the ampere force received), the deflection angle is magnified and displayed on the dial by the pointer, which greatly improves the visibility of the experiment.
BulletPoint3 : Before use, the pointer should be calibrated to point to zero scale.
BulletPoint4 : When using, make sure that the three contacts of the wire frame are in good contact with the connecting reeds of the terminal. If necessary, the contact points can be polished with fine sandpaper. If the contacts in the middle are not in contact with the reeds, the reeds can be properly pressed down.
BulletPoint5 : When transporting the instrument, avoid collisions and drops to avoid deformation of the wire frame and pointer and the magnetic needle from falling off.
ExternallyAssignedProductIdentifier : 7071545109667
ExternallyAssignedProductIdentifier1 : 0749767168843
ExternallyAssignedProductIdentifier2 : 749767168843
IncludedComponents : Package Included 1* Spring Pressure Load Tester Rack All Accessories for Use
ItemName : Dntum Ampere Force Demonstrator Physical Experiment Instrument for The Action of Magnetic Field on Current
ItemTypeKeyword : force-gauges
Manufacturer : Dntum
Material : Iron
MeasurementAccuracy : 1000N
MetalType : other
NumberOfItems : 1
PartNumber : SYMXZJ0074017
ProductDescription : Name: Ampere Force Demonstrator
Size: 180*130*310mm/7.08*5.11*12.2 in
Weight: 1400g
Material: metal bracket and base + magnet + plastic dial
Precautions
1. The pointer should be calibrated to make it point to zero scale before use.
2. When using, make sure that the three contacts of the wire frame are in good contact with the connecting reeds of the terminal. If necessary, the contact points can be polished with fine sandpaper. If the contacts in the middle are not in contact with the reeds, the reeds can be pressed down appropriately.
3. When transporting the instrument, avoid collision and falling to avoid deformation of the wire frame and pointer and the magnetic needle from falling off.


ProductSiteLaunchDate : 2024-05-20T07:54:14.953Z
Size : 5N
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1