Cart 2 india

Specification
Brand : FAMAG
BulletPoint1 : 3/8 inch Bormax Forstner bit with hex shank
BulletPoint2 : Saw teeth on the outside rim score the perimeter of the hole producing smooth, accurate and straight holes with less splintering and wandering.
BulletPoint3 : Both long inside cutting edges have a chip breaker design that features offset or staggered cutting edges. These offset cutting edges break up chips into smaller pieces for better chip ejection. This allows drilling smaller diameter and deeper holes with no clogging. The offset cutting edges also require less torque to drill and generates less heat. The body also has an oversize chip ejection area that efficiently ejects chips
BulletPoint4 : The low profile outside rim has longitudinal cooling fins or grooves ground into the surface minimizing metal contact with wood reducing friction resulting in much better heat dissipation. Reducing heat buildup prevents premature dulling and greatly increases the life of the cutting edges. You can drill at higher RPMs without fear of excessive heat build. Recommended RPMs are printed on individual packages. Outside rim also has vertical channels that assist in chip ejection.
BulletPoint5 : The eccentric or twisted center point reduces the force needed to feed the bit, minimizes wandering and allows for fast penetration. The center point allows easy starting in wood and allows drilling of overlapping and angled holes.
BulletPoint6 : All sizes feature hex shanks for better power transfer that will not slip in a drill chuck. These bits work equally well in drill presses and hand and cordless drills. Bits feature a black oxide baked on finish that resists corrosion and residue build up.
BulletPoint7 : Made from German alloy tool steel on CNC machines to very precise tolerances. All bits can be sharpened with a diamond file. Available in sizes from 1/4 to 2-1/8 inch in 1/16 inch increments. Overall lengths are 3-1/2 inch.
Color : Multi-colour
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier : 4026271274182
ExternallyAssignedProductIdentifier1 : 088381404648
ExternallyAssignedProductIdentifier2 : 0088381404648
ExternallyAssignedProductIdentifier3 : 00088381404648
FinishType : Black Oxide
GpsrSafetyAttestation : 1
IncludedComponents : Forstner bit
ItemName : Famag Bormax 3/8 inch Forstner Bit Imperial, Outside Rim Saw Teeth, Hex Shank, Cooling Fins, Twisted Center Point, German Alloy Steel (3/8")
ItemPackageDimensions_Height : 28 centimeters
ItemPackageDimensions_Length : 47 centimeters
ItemPackageDimensions_Width : 35 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : forstner-bits
Manufacturer : Famag
Material : Carbide
Material1 : Diamond
Material2 : Alloy Steel
ModelNumber : 1622.215
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 5
PackageLevel : unit
PartNumber : 1622.215
ProductDescription : These Famag Bormax forstner drill bits are the finest in the world. They drill the cleanest and fastest holes with the best chip ejection, generate the least amount of heat, require less toque and downward pressure and stay sharper longer than any other brand. They are made by Famag, a German manufacturer, who has been making high end boring bits for over 150 years.

Features:

Saw teeth on the outside rim score the perimeter of the hole producing smooth, accurate and straight holes with less splintering and wandering.

Both long inside cutting edges have a chip breaker design that features offset or staggered cutting edges. These offset cutting edges break up chips into smaller pieces for better chip ejection. This allows drilling smaller diameter and deeper holes with no clogging. The offset cutting edges also require less torque to drill and generates less heat. The body also has an oversize chip ejection area that efficiently ejects chips.

The low profile outside rim has longitudinal cooling fins or grooves ground into the surface minimizing metal contact with wood reducing friction resulting in much better heat dissipation. Reducing heat buildup prevents premature dulling and greatly increases the life of the cutting edges. You can drill at higher RPMs without fear of excessive heat build. Recommended RPMs are printed on individual packages.

Outside rim also has vertical channels that assist in chip ejection.

The eccentric or twisted center point reduces the force needed to feed the bit, minimizes wandering and allows for fast penetration. The center point allows easy starting in wood and allows drilling of overlapping and angled holes.

All sizes feature hex shanks for better power transfer that will not slip in a drill chuck. These bits work equally well in drill presses and hand and cordless drills.

Bits feature a black oxide baked on finish that resists corrosion and residue build up.

Made from German alloy tool steel on CNC machined to very precise tolerances.

All bits can be sharpened with a diamond file.

Available in sizes from 1/4” to 2-1/8” in 1/16” increments.

Overall lengths are 3-1/2”


ProductSiteLaunchDate : 2018-03-20T16:08:57.914Z
Size : 14mm, 15mm
StreetDate : 2017-04-04T00:00:01Z
Style : 3/8"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Engineered Wood
SurfaceRecommendation2 : Wood Cycl
UnitCount : 0.01
UnspscCode : 27111700