Cart 2 india

Specification
Brand : Fisch
BulletPoint1 : EXCEPTIONALLY CLEAN, FLAT-BOTTOMED HOLES – Multi-spur geometry creates smooth, skip-free bores with a flat base for woodworking precision.
BulletPoint2 : ENGINEERED FOR ACCURACY AND CONTROL – Center point and precision-ground cutters ensure exact starts and clean paths in hardwoods, softwoods, and end grain.
BulletPoint3 : DURABLE, HIGH-GRADE TOOL STEEL – Built to maintain sharpness and resist heat—up to 300 holes before sharpening needed.
BulletPoint4 : OPTIMIZED FOR POCKET HOLES AND HARDWARE INSTALLATIONS – Perfect for pocket hole joinery, cabinetry, and furniture building projects.
BulletPoint5 : MADE IN AUSTRIA FOR PROFESSIONAL RESULTS – Trusted by woodworking professionals for consistent, high-efficiency performance.
Color : Silver
ExternallyAssignedProductIdentifier : 9002696010234
GpsrSafetyAttestation : 1
IncludedComponents : Multi-Spur Bit 7/8" Dia
ItemDisplayDimensions_Length : 8 centimeters
ItemName : Fisch Multi-Spur Bit 7/8" Dia x 1/2" x 5" Oal (FSA-010234)
ItemPackageDimensions_Height : 15.9004 centimeters
ItemPackageDimensions_Length : 2.8956 centimeters
ItemPackageDimensions_Width : 2.8956 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : forstner-bits
Manufacturer : Fisch
Material : Diamond
Material1 : Carbide
Material2 : Alloy Steel
ModelNumber : FSA-010234
NumberOfItems : 1
PackageLevel : unit
PartNumber : FSA-010234
ProductDescription : Utoolmart Forstner Drill Bits Tungsten Carbide Wood Hole Saw 23mm Gray

Technical Parameters
Drilling dia: 23mm / 0.91"
Total length: 80mm / 3.15"
Color: Gray
Shank type: Round shank
Material:Cemented carbide;45# steel

Product Feature
*Can be used for wood product perforation,installation of spherical door locks,drawer locks,hard plastic products,etc.Dedicated to wood board opening and mounting hinges.
*When positioning the drill,please wait a moment and then drill slowly.
*If there is any abnormality or chip removal during operation,please stop working immediately and clean the debris before continuing the drilling operation.

Instructions for woodworking hole opener
1. Put the hole opener into the electric drill before use and confirm that it is firmly clamped before it can work.
2. Keep the vertical angle with the workpiece when working. After the hole opener drills through the workpiece, the workpiece should be withdrawn while the hole opener is rotating. Please clean the sawdust in time to avoid opening failures during continuous work.
3. Workers should wear corresponding protective equipment when working to protect them from working safely, and apply rust oil after use to extend the service life.

Package Includes
1 x Hole Opener
ProductSiteLaunchDate : 2020-03-11T20:11:08.775Z
Size : 23mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Wood,Steel
UnitCount : 1
UnspscCode : 27111700