Cart 2 india

Specification
Brand : Respicefinem
BulletPoint : High Accuracy Frequency Counter RF Meter 1~500 MHz Tester Module for Ham Radio 0802 LCD Display with Backlight 9V
BulletPoint1 : Aa Battery Use An Ordinary Aa Battery, Never Connect An External Power Supply External Power Supply Will Damage The Counter The Power Consumption Of The Counter Is Ultra Low, So It Is Not Necessary To Press The Pause Or To Turn Off The Counter Every Day To Save Power. If The Counter Is Abnormal, It Be Restarted. Method: Take Out The Battery, Install The Battery In The Opposite Direction, Then Take Out The Battery, And Then Install The Battery In The Standard Direction.
BulletPoint2 : Tally Counter, Use The Signal Line For Counting And Clearing Input Should Be Short Possible To Avoid Wiring With Strongity Or Power Lines To Avoid Unnecessary Interference If Necessary, Please Use Lines, And The Shielding Layer Is Connected To The Counting Terminal. The Signal Without Voltage Be Input For The Counting Signal And The Reset Signal, And No Otheral Signals Be Input.
BulletPoint3 : Seismic Proof And Stable: Adopt Seismic Proof, Effectively The Stable And Of The System
BulletPoint4 : Accurate And Convenient This Counter Using Magnet Induction, Simple And Convenient Installation, Bring Accurate Counting. Adopt Seismic Proof, Effectively The Stable And Of The System.
BulletPoint5 : No Wear And : No Mechanical Wear, Support And Service Life, You Use With Confidence
IncludedComponents : No
ItemName : Respicefinem 5 10×6×5 Berm Punch Electronic Counter 5 Digit Digital Display 099999 Plastic Sensor with Magnetic
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : frequency-counters
Manufacturer : Respicefinem
MeasurementAccuracy : 0.1mm
ModelName : Respicefinemm7r1g9xpbu
ModelNumber : Respicefinemm7r1g9xpbu
NumberOfItems : 1
PartNumber : Respicefinemm7r1g9xpbu
ProductDescription :
Item Type: Punch Electronic Counter
Material: ABS
Battery Model: 1.5V AA battery(not included)
Counting Range: 0-99999
Highest Frequency of Counting: 20HZ
Counting Minimum Pulse Width: 1MS
Clear Minimum Pulse Width: 1S
Magnet Induction Proximity Distance: Approx. 10 ~ 15mm / 0.39 ~ 0.59in
Magnetic Induction Distance: Approx. 35mm / 1.38in

Package List：
1 x Counter
1 x Magnetic Control Induction Switch
1 x Magnet
1 x Bracket

Note:
1. The signal line for counting and clearing input should be as short as possible to avoid wiring with strong electricity or power lines to avoid unnecessary interference; if necessary, please use shielded lines, and the shielding layer is connected to the counting terminal +.
2. Only the signal without voltage can be input for the counting signal and the reset signal, and no other electrical signals can be input.
3. The sensing distance is related to the magnetic size of the magnet. You can change the sensing distance by changing different magnets.
4. The use temperature of the magnet cannot exceed 70 degrees Celsius. If the temperature is too high, the magnetism will disappear and the induction will fail.
5. When the screen display is blurred, please replace the new battery; when not in use for a long time, please press to pause or switch the machine to turn off the counter and auxiliary battery; you can also take out the battery together to prevent the battery from deteriorating and leaking and damaging the counter.
6. Use an ordinary AA battery, never connect an external power supply (external power supply will damage the counter); the power consumption of the counter is ultra low, so it is not necessary to press the pause or switch to turn off the counter every day to save power.
7. If the counter is abnormal, it can be restarted. Method: Take out the battery, install the battery in the opposite direction, then take out the battery,
ProductSiteLaunchDate : 2024-12-19T07:53:07.377Z
UnspscCode : 41113600