Cart 2 india

Specification
Brand : Ongniong
BulletPoint : Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display 1Hz-150Khz 3.3V-30V PWM Board Module
BulletPoint1 : EFFICIENCY WORK: The counting machine, equipped with efficient, stable and 25W powerful motor, will help you automatically calculate the number of parts and simplify the part-feeding process.
BulletPoint2 : ACCURATE COUNTING: The laser cutting gears are more accurate, and the alignment fiber optic leak detection device can accurately measure the number of parts using the correspondence between the guide holes and the parts. Also, the machine will automatically stop when it is empty, making it safe for you to operate.
BulletPoint3 : EASY OPERATION: The 3-digit LCD display makes it easy to observe the process and status of dispensing while the high-precision motherboard control and English&Chinese intelligent control panel allow you to set the count, pitch, time, forward and reverse rotation, leak detection, which is very convenient.
BulletPoint4 : DURABLE SMT/SMD COUNTER: High-quality aluminum and steel plus powder coating process make the component counter sturdy and stable, anti-corrosion and rust-proof, keeping excellent performance for a long time.
BulletPoint5 : MULTIPLE MODES: You can choose to set the number of parts manually or use the automatic mode, and also you can choose among three speeds: high speed, medium speed, and low speed to improve the efficiency of the counting.
IncludedComponents : 1 *Counter;1* Power Cord; * Mirror;1* Chinese and English Manual
ItemName : SMT SMD Component Counter, Automatic Counting Machine SMT/SMD Parts Component, AC 110V 25W Reel Parts Counter LCD Display with Leak Detection
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-counters
Manufacturer : BOBBINN
Material : Copper
MeasurementAccuracy : -99999~99999PCS
ModelNumber : SMT/SMD Component Counter
PartNumber : SMT/SMD Component Counter
ProductDescription :

Description

The SMT/SMD components counter adopts the principle of photoelectric sensing, and uses the corresponding relation between the guide hole and the part, through the special-purpose processing chip and the large-scale centralized circuit processing to realize less error, accurately measure the number of SMD parts, can realize the convenient and quick count. It is an efficient auxiliary equipment for SMT material management.

 

Details

Rounded Edges: Compared to stiff right angles, the rounded burr-free edges make it more comfortable to touch while better caring for your skin.

 

Auxiliary Rod: The rod in front of the control panel helps you to make the machine stable without shaking and assists you to apply better force.

 

 

 

Mirror: It helps the fiber optic detector to receive the signal better, and also facilitates you to observe the status of the point material.

 

Operation Methods:

1. Connect the power cord to the host and connect the AC110V power supply.

2. Turn on the POWER switch of the machine panel, and the LCD panel will shine.

3. Press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray.

4. Manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate.

5. Press the "STOP/RESET" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count.

6. Press the "SETTING" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "FORWARD" and the motor will not rotate.

7. Pull the material belt by hand and wind it to the empty material plate. Press "FORWARD /RIGHT" to count.

8. The motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1, which can be manually rotated to the LCD display set value in the direction of the material disk, that is, the number of parts.

9. After counting, press the "REVERSE /LEFT" tape and then roll it back to the original LEFT panel, and then stop rotating.

 

Installation

Mirror Installation

1. Use the hexagonal plate hand to screw out the two hexagonal screws behind the pointing machine.

2. Align the mirror with the hole of the dispenser and then screw on the screws.

 

Pallet Installation

1. Use the screwdriver to screw up the 2 screws on the rotating shaft.

2. Align the tray with the hole of the shaft and lock the screws.

 

Application

It is suitable for belt elements made of SMD material and for pulleys of any diameter, and widely used for counting the quantity of SMD materials such as resistors, magnetic beads, capacitors, diodes, ICs, various chips, and LED beads. It can be applied in the electronic product manufacturing industry, SMT processing factory, EMS professional electronic manufacturing service factory, SMD parts manufacturer, SMD parts supplier, parts counter, and tape packaging manufacturer for fully automatic IQC incoming inspection, counting of tape packaging and checking of missing parts, inventory management, and other operations.

 

Specification

Color: White

Shape: Rectangle

Style: Modern

Display: 3-digit LCD

Power Cord Length: 1.5m/ 4.9 ft

Assembly Required: Yes

Number of Items: 1

 

Power Supply: AC110V,60HZ

Power: 25W

Counting Range: -99999~99999PCS

Material: Aluminum, Steel

Process: Laser Cutting ( Gear Sheet ), Powder Coating ( Surface ), Computer Gong Production Process ( Machined Parts )

Pitch: 1mm/ 0.04in, 2mm/ 0.04in, 4mm/0.07in, 8mm/ 0.16in,10mm/ 0.31in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56 mm/ 2.2in

Width: 4mm/0.07in, 6mm/ 0.24in, 8mm/ 0.16in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56mm/ 2.2in 

Product Size: 76.5*30*19cm/ 30.12*11.8*7.48 in

Net Weight: 9.5kg/20.9 lbs

Gross Weight:10 kg/ 22.05 lbs

 

Package Included

1 * SMT/SMD Components Counter

1* Power Cord

1* Mirror

1* Chinese and English Manual

All Accessories for Assembly

 

Notes

1. After unpacking, please check if all the attachments are complete.

2. Please read the operation manual carefully before using and keep it properly.

Check whether the voltage specification is consistent with that of municipal power. Please make sure to connect the ground wire to ensure the safety of the person and parts.

ProductSiteLaunchDate : 2024-03-22T06:59:00.857Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1