Cart 2 india

Specification
AgeRangeDescription : adult
AudioInput : XLR
Brand : Walfront
BulletPoint : ACH-CP-B Frequency converter module
BulletPoint1 : GOOD PERFORMANCE-- The Converter adopts high quality material for long lifespan. The input end is isolated by diaphragm, which can guaranteed anti-interference ability.
BulletPoint2 : NOTE-- It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC,at least 15VDC power supply is required. When the 24V level is used, the power supply needs to be powered by 24VDC.
BulletPoint3 : APPLICATION-- This module can be used to convert the 0-500 Hz frequency pulse into an analog voltage of 0-10V. It is ideal for interface conversion between PLC and inverter. Or the motion control card and the inverter and other interfaces match the control occasion.
BulletPoint4 : WITH MULTI-TURN POTENTIOMETER-- The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage. The input power supply voltage range is 12-30VDC.
BulletPoint5 : FEATURE-- The input pulse level of 5V 12V 24V can be directly input, without string . However, the input frequency should be maintained for more than 0.5 seconds.The output current is 5mA.
Color : Green
ConnectivityTechnology : Radio Frequency
ExternallyAssignedProductIdentifier : 4861048444944
ExternallyAssignedProductIdentifier1 : 737983753837
ExternallyAssignedProductIdentifier2 : 0737983753837
ItemName : Frequency to Voltage Converter with Shell 0~500Hz to 0~10V Converter Module FVS-500Hz10V Converter
ItemPackageDimensions_Height : 12.8 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 8.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : Walfront
Material : Plastic
ModelName : WUZDPRCJ
ModelNumber : WUZDPRCJ
NumberOfBoxes : 1
NumberOfChannels : 1
NumberOfItems : 1
OutputConnectorType1 : XLR
OutputConnectorType2 : TRS
PartNumber : WALFRONT8oehqkc23a
PowerSourceType : PowerSource
ProductDescription : Features:
Convert the 0-500 Hz frequency pulse into an analog voltage of 0-10V. Can be used for interface conversion between PLC and inverter. Or the motion control card and the inverter and other interfaces match the control occasion. The input pulse level of 5V 12V 24V can be directly input, without string . However, the input frequency should be maintained for more than 0.5 seconds.The output current is 5mA. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.  
Specification:
Item Type: Frequency to Voltage Converter Module
Model: FVS-500Hz10V
Conversion: 0~500Hz to 0~10V
Output Current: 5mA
Size: 7.3 x 5 x 2.8cm / 2.87 x 1.97 x 1.1in
Correspondence Relationship(Linearity)
50Hz converted to 1V
Convert 250Hz to 5V
Convert 500Hz to 10V

Package List:
1 x Converter Module with Shell

Note:
If you need to use PLC, support NPN type. Must have a ground wire.
If you need to use with the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds.
Frequency and voltage conversion module, response time is about 0.3-0.5 seconds.
If the input is turbine , etc., due to matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function.
Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.

ProductSiteLaunchDate : 2019-10-29T08:37:19.489Z
Size : 0-1KHZ TO 0-10V
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 0.3527
UnspscCode : 26111500
Voltage : 5 volts
WarrantyDescription : 1 Year