Cart 2 india

Specification
Brand : SFYYML
BulletPoint : landscape-lighting-transformers
Color : One Color
ExternallyAssignedProductIdentifier : 9405666948986
ItemName : FV-1KHz10V Frequency Voltage Converter Module 0~1Khz Frequency Pulse to 0~10V Analog Voltage Conversion Module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : SFYYML
Material : Copper
MinimumFrequency : 50 hertz
ModelNumber : SFYYML
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : SFYYML
ProductDescription : landscape-lighting-transformers
FV-1KHz10V Frequency Voltage Converter Module 0~1Khz to 0~10V Digital to Analog Module Conversion Module
Features:1. The 0-1KHz frequency pulse is converted into a 0-10V analog voltage by this module.2. The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.3. Input pulse level of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds.4. All parts of the converter module are well-selected of good durability.5. The module is stable and has great performance while using.Specification:Item Type: Frequency to Voltage Converter ModuleSize: 4.5x4.7x1.7cm / 1.77x1.85x0.67inRelationship, Linearity:100Hz to 1V0.5Khz to 5V1Khz to 10VPackage List:1 x Converter ModuleNote:1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter.At 24 levels, the power supply needs to be powered by 24VDC3. The input end is isolated by diaphragm. Guaranteed anti-interference ability.4. If you need to use PLC, support NPN type. Must have a ground wire.5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds.6, frequency and voltage conversion module, response time is about 0.3-0.5 seconds.7. If the input is , etc., due to matching, an 817 diaphragm and a resistor must be added to match the meter to normal function.8. Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we
ProductSiteLaunchDate : 2024-04-17T03:59:26.020Z
Size : One Size
UnitCount : 1
UnspscCode : 32101600