Cart 2 india

Specification
Brand : NGW
BulletPoint : NGW-1pc Frequency to Voltage 0-10Khz to 0-5V 0-10V Linear Conversion Transmitter Module
BulletPoint1 : Current Sensors
BulletPoint2 : ALH-0.66 II Current Transformer ALH-0.66 40II 300/5 0.2R 2.5VA 2T丨100955127
Color : One Color
ExternallyAssignedProductIdentifier : 6276123781735
ExternallyAssignedProductIdentifier1 : 0680465492314
ExternallyAssignedProductIdentifier2 : 680465492314
ItemName : NGW-1pc Frequency to Voltage 0-10Khz to 0-5V 0-10V Linear Conversion Transmitter Module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : frequency-transducers
Manufacturer : NGW
ModelNumber : Frequency to Voltage
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Frequency to Voltage
ProductDescription : NGW-1pc Frequency to Voltage 0-10Khz to 0-5V 0-10V Linear Conversion Transmitter Module Frequency to Voltage 0-10Khz to 0-5V 0-10V Linear Conversion Transmitter Module Frequency converter module This is a linear conversion module that converts the input frequency signal to a standard voltage signal output via internal chip processing. There are two output voltage range options. Module parameters 1, the supply voltage: 9V ~ 24V 2, the signal input voltage range: 4 ~ 24V 3, signal input frequency range: 0Hz ~ 10KHz 4, the signal input duty cycle range: 5 ~ 95% 5, the output voltage: 0.00V ~ 5.00V/0.00V ~ 10.00V 6. Input mode: S1 pad on the circuit board: The default is open-circuit input 0~10kHz, input 0~1kHz when short circuit. 7. Output mode: S2 pad on the circuit board: open circuit (output 0.00V to 5.00V); short circuit (output 0.00V to 10.00V), default is open circuit. 8, the scope of application: remote data acquisition and control equipment; 9, size: (long) 26mm * (width) 23mm * (high) 10mm 10, module interface: 12V: Positive power connector (9V to 24V). G: Power ground connector. IN: Signal input positive interface. G: Signal input negative interface. OUT: Signal output interface (0.00V to 5.00V/0.00V to 10.00V). G: Power ground connector. Note: When the output is from 0.00V to 10.00V, the power supply voltage must be supplied at 15V. Output (0.00V to 5.00V) Resolution: 0.0005V/D (Volts per Hertz) Output (0.00V to 10.00V) Resolution: 0.0010V/D (Volts per Hertz) Calculate the frequency ratio to be measured: (output voltage (V)/resolution) = frequency (Hz). For example: Output (0.00V to 5.00V) Output is 2.5V (2.5(V)/0.05) = 5000(Hz).
ProductSiteLaunchDate : 2018-03-13T07:00:00.000Z
Size : One Size
UnitCount : 1
UnspscCode : 32101600