Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : When the guitar is played for a long time, there will be some small pits or flattened on the commonly used fret position, there will be noise, intonation problems, etc., so the frets need to be replaced timely. These fretboard frets are used for fret replacement on electric guitar.
BulletPoint2 : Package Content: 1 Set 24 Fret Guitar Frets; Color: Silver Tone; Number of Frets: 24; Maximum Width: 2.4mm/0.09 inch
BulletPoint3 : Replace and upgrade better copper material guitar frets, durable and high strength, restore beautiful guitar sounds. Bright shades and delicate smooth surface, good for DIY guitar fret making and replacement.
BulletPoint4 : Remove the old frets with pliers, then clean the fret groove and check its depth, confirm the arc of the guitar fretboard, apply glue, install new frets, pressure frets and wait for the glue to dry, repairing edge corners are leveled, polished.
BulletPoint5 : Confirm the width of your guitar frets, and make sure that the frets and the fretboard fit completely when installing the frets.
Color : Silver
GuitarBridgeSystem : Fixed
GuitarPickupConfiguration : S or H
ItemName : MECCANIXITY Electric Guitar Fret Wire Guitar Fretboard 24 Fret 2.4mm Silver Tone for Guitar Fingerboard Replacement, Pack of 24
ItemPackageDimensions_Height : 8.9 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 6.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-guitar-frets
Manufacturer : MECCANIXITY
NumberOfStrings : 24
PartNumber : mea220422ee1292
ProductDescription : What is this?
When the guitar is played for a long time, there will be some small pits or flattened on the commonly used fret position, there will be noise, intonation problems, etc., so the frets need to be replaced timely. These fretboard frets are used for fret replacement on electric guitar.

What will I get?
Package Content: 1 Set 24 Fret Guitar Frets; Color: Silver Tone; Number of Frets: 24; Maximum Width: 2.4mm/0.09 inch

Are there any advantages of the product?
Replace and upgrade better copper material guitar frets, durable and high strength, restore beautiful guitar sounds. Bright shades and delicate smooth surface, good for DIY guitar fret making and replacement.

How to use it?
Remove the old frets with pliers, then clean the fret groove and check its depth, confirm the arc of the guitar fretboard, apply glue, install new frets, pressure frets and wait for the glue to dry, repairing edge corners are leveled, polished.

What should I notice?
Confirm the width of your guitar frets, and make sure that the frets and the fretboard fit completely when installing the frets.



ProductSiteLaunchDate : 2022-07-17T11:03:53.518Z
Size : 2.4mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 60131500