Specification Brand : Kawish BulletPoint1 : Manual fuel injector cleaning tool: the electrical interface of car fuel injector flush cleaner adapter cleaning tool set nozzle is connected to 12V power supply through this line, which is suitable for fuel injectors of most models. When used with detergent, gasoline can be seen intuitively According to the atomization shape, it can be judged whether there are faults such as clogging oil leakage or lax closure. BulletPoint2 : Diesel fuel nozzle adapter with two circular hole diameters: the sizes are 14 mm and 11 mm respectively, which can be connected to fuel injectors of different sizes for better troubleshooting. This adapter kit is easy to use with a can of carb cleaner or other cleaner to clean and flush injectors BulletPoint3 : Battery crocodile clip with red and black rubber cover: red is the positive pole, black is the negative pole, the maximum opening of the crocodile clip is 25mm, the bite force is strong, and the clamping is firm. (Note: When in use, the black crocodile clip clamps the battery and does not move, and the red crocodile clip indirectly touches the battery to supply power. Do not continuously power on for more than 10 seconds) BulletPoint4 : Extended connecting wire: This wire is as long as 80cm, allowing you to say goodbye to the annoyance that the wire is too short and restricts the range of activities. The wire is wrapped with high-quality insulating rubber material to prevent accidental leakage and provide protection for your safety. BulletPoint5 : WIDE COMPATIBILITY: This fuel injector tester and cleaner kit helps extend the life of your fuel injector and is a must-have for home mechanics. Compatible with any 12-24V car, motorcycle, EV, boat and more. Applicable injector brands: Bosch, Denso, Delphi, Siemens, Magneti Marelli (except cylinder direct injection nozzles) CompatibilityOptions : 12V Fuel Injector Configuration : Flush Cleaner Adapter for Car Fuel Injector Tester ExteriorFinish : plastic ExternallyAssignedProductIdentifier1 : 739804996263 ExternallyAssignedProductIdentifier2 : 0739804996263 FitType : Universal ItemName : Universal Fuel Injector Flush Cleaner Adapter, with 2 Size Injectors Nozzles Adapter, 12V Fuel Injector Cleaning Kit for Auto Car Diesel Gas Fuel Injector ItemPackageDimensions_Height : 16.002 centimeters ItemPackageDimensions_Length : 5.207 centimeters ItemPackageDimensions_Width : 15.1892 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : automotive-fuel-injection-systems-cleaning-tools Manufacturer : kawish Material : Plastic ModelName : Fuel Injector Cleaner ModelNumber : Fuel Injector Cleaner Kit -1 NumberOfItems : 4 OeManufacturer : Fuel Injector Cleaner Kit Tool PartNumber : n-1 ProductDescription : 【Injector Cleaner Kit】 The package includes 2 white Flush Cleaner Adapter and 2 alligator clip charging cables, which can fit 2 different sizes of injectors. This adapter kit is easy to use with a can of carb cleaner or other cleaner to clean and flush injectors
【Size】 Two alligator clip charging cables: large plug and small plug. White tube with two round hole diameters, The alligator clip has a wide opening range, strong bite force, high hardness and toughness of the wire, length: 80cm.
【Working principle】 The electrical interface of the fuel injector is connected to the 12V power supply through this line. When the current is turned on, the solenoid valve in the nozzle opens. At the same time, the cleaning liquid is flushed through the white tube through the liquid pressure in the cleaning bottle, and then cleaned through the injector.
【Wide Compatibility】 This fuel injector cleaning adapter is compatible with any 12-24V car, motorcycle, electric car, boat, etc. Applicable injector brands: Bosch, Denso, Delphi, Siemens, Magneti Marelli (except cylinder direct injection nozzles)
【Warm Tips】 (1)When the adapter is loosened, some cleaning agent may be sprayed out. Always use protective gloves and wear goggles. (2) You can put a rag at the nozzle connection to prevent the cleaner from spraying everywhere. (3) Clean the area around the injector before disassembling it, as dust and grime can accumulate over time and may enter the cylinder if not cleaned.