Cart 2 india

Specification
Brand : BASCOLIN
BulletPoint1 : Common rail injector tester S60H
BulletPoint2 : Fuel injector tester tools CR-C
BulletPoint3 : Common rail injector test bench
BulletPoint4 : Injector tester and CR-C Injector Drive
BulletPoint5 : common rail injector tool kits
ExternallyAssignedProductIdentifier1 : 0775185042649
ExternallyAssignedProductIdentifier2 : 775185042649
FitType : Vehicle Specific
ItemName : BASCOLIN Common Rail Injector Tester S60H Diesel Injector Tester Machine CR-C Fuel Injector Drive Tester Injector Common Rail Pressure Tool
ItemPackageDimensions_Height : 22 inches
ItemPackageDimensions_Length : 24 inches
ItemPackageDimensions_Width : 20 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-fuel-pressure-testers
Manufacturer : BASCOLIN
PartNumber : S60H CR-C
ProductDescription : How to test common rail injectors?
1.Load common rail injector into the clamp and connected to the common hand pressure calibrato
2.Select the appropriate plug according to the injector brand and then connect the wiring harness to the injector.
3.According to the injector brand, select the corresponding drive mode. At this time, you can hear the injector solenoid valve suction armature "pa,pa" sound.
4.Provide the proper injection pressure by continuously lowering the lever of the calibrator. The general pressure value is 30-40MPA, and the atomization performance of the injector can be observed at this time.
5.Through the external cylinder, fuel oil quantity and return oil quantity of fuel injector can be detected.

UnspscCode : 25191800