Cart 2 india

Specification
Brand : CEMELI
BulletPoint : Thermostats
BulletPoint1 : Independent Channel: Both channels are independent of each other and have phase synchronization function.
BulletPoint2 : Basic Parameters: Sampling rate: 200MSa/S, vertical resolution: 13bit and storage depth: 8k.
BulletPoint3 : Digital Display: 2.4-inch TFT LCD display, 320*240 resolution, with clear graphic interface.
BulletPoint4 : Measurement Mode: The measurement mode has 2 functions, one is a frequency meter, the other is a counter. They measure digital signals from the external input port.
BulletPoint5 : Frequency Meter: The frequency meter is used to measure the frequency. The frequency is measured by equal precise measurement. The coupling and gate time can be set.
Color : One Color
ExternallyAssignedProductIdentifier : 7320431062310
ItemName : 8-Channel 485 to PWM/PNP Signal Output Square Wave Pulse Signal Generator Modbus
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : function-generators
Manufacturer : CEMELI
ModelName : CEMELI
ModelNumber : CEMELI
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CEMELI
ProductDescription : Thermostats
1. Product Overview
This product is an PWM/PNP(Transistor switch output) signal output module,which is output through an RS485 interface.
1)PWM and PNP signal output are selected through software selection.
2)8-channel PWM: frequency range 1HZ-100Hz, duty cycle 0-100%.
3)Power supply voltage: DC7V-28V
4)Output voltage range: DC7V-36V
5)Single channel maximum output current: 3A
6)Maximum output current of the entire board: 20A
7) The module adopts RS485 MODBUS RTU standard communication, it can be networked with the host computer software, PLC, industrial touch screen, etc.
8) RS485 communication signal output interface adopts over-voltage and over-current double protection.
6 Restore settings
Press the restore button for more than 5 seconds,The module will to settings;
The communication parameters : 9600, N, 8, 1,
The device address : 1
PNP output mode.
PWM parameters are not memorized after power failure
Restore the PWM parameter register to its default value;
PNP output delay recovery is 0
ProductSiteLaunchDate : 2024-07-26T09:19:05.809Z
Size : One Size
UnitCount : 1
UnspscCode : 26111600